Rack Mount Speaker System
Lieferzeit 4 Wochen
The Kramer FC-101Net Dual-Channel Dante Interface Decoder provides professional quality with advanced and user-friendly operation of streaming, distributing, and managing audio signals over IP networks.
Word Clock Distribution Amplifier. Dual 1>4 / Single 1>8 - BNC. A 20% restocking fee applies to all product returns.
GPIO to LAN Transceiver (EMBER+ & UDP)
Stereo Line Isolation Unit
The HD-MA35A is a three input audio mixer amplifier for systems demanding a broad range of features and high energy efficiency. Two output power amplifier zones are provided, 35 W (Zone 1) and 2 W (Zone 2). Includes worldwide power supply (no power cord).
The MA-BT240 is a versatile mixing amplifier designed for sound distribution, presentations and announcements in smaller commercial environments.
Lieferzeit binnen 4 bis 6 Wochen
Input: 1× AIREA®-NET (RJ45), Output: 2× Analog Audio (XLR male, symmetric) and 1× FOHHN®-NET (RJ45)
The AVN-DIO09 is a Microphone input to Dante converter in the Sonifex DIO range of Dante input/output devices with A/D circuitry offering a world-class E.I.N. of 129dB.
The FP-PEQ3 is the ideal choice in many applications where parametric equalization or acoustic notch filtering is needed. The compact unit is a single-channel module featuring three identical independent filters. Each filter has separately adjustable frequency, boost/cut and bandwidth parameters.
The RDL SF-PA50AX is a SysFlex series 50W 70/100V mono audio amplifier designed to convert one analog input to a constant voltage amplified output for A/V technicians, system installers, and audio engineers in office buildings, retail environments, and educational facilities.
The AVN-DIO04 is a Dante to analogue phono stereo input & output convertor in the Sonifex DIO range of Dante input/output devices.
DSP-1 is a digital sound processor that enables the control of individual volume per input, 3-band parametric EQ, selectable HPF (high-pass filters) at 70Hz and master volume via IP. DSP-1 is a small form factor and cost-effective solution suitable for a range of audio applications
The FP-AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a single 75 Ohm input phono jack for the video signal and two phono jacks for the left and right audio inputs.
The AVN-DIO05 is a Dante to analogue terminal block input and output convertor in the Sonifex DIO range of Dante input/output devices. It features balanced stereo analogue inputs and outputs on a terminal block connector and one Neutrik EtherCon connector for direct connection to a Dante AoIP network.
19 inches Vocal processor with Auto-Tune pitch correction, compressor, de-esser, mic-tube modelling, noise gate, etc.
Lieferzeit binnen 4 bis 6 Wochen
The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal.
The DPA MMP-B Preamplifier is a preamplifier and output stage for DPA Reference Standard MMC series capsules.
The Sonifex AVN-DIO03 is Dante AoIP network-to-headphones converter in the Sonifex DIO range of Dante input/output devices.
The RU-ADA4D is a four-channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks.
Dual Microphone Amplifier
Mix-Minus Generator
The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network control, a Mathematically Modeled Dispersion Waveguide (MMD), an analogue input and an extensive range of mounting hardware
The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network control, a Mathematically Modeled Dispersion Waveguide (MMD), an analogue input and an extensive range of mounting hardware
RU-PA40D is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ohm or 8 Ohm speakers. It is specifically suited to amplification applications where users need to adjust the gain. Examples include projectors or monitors with fixed audio outputs used in classrooms, boardrooms or video...
The RU-SM16A 2-Channel Audio Meter is a 1RU 1/3 rack module designed for precise metering of up to 2 channels of audio. The unit can be used for either 2 channels of mono metering or stereo operation and is designed to be integrated into new and existing setups.
The FP-ALC2 is the ideal choice in many applications where consistent stereo audio levels are needed from consumer sources with varying audio output levels. Power connections are made using either the full-size barrier block or a dc power jack.
The RU-TPS4A is a four output audio sender, signal and power distributor module compatible with RDL Format-A twisted pair products. Three line-level sources may be connected to the module using the +4dBu balanced detachable terminal block. A bank of studio-quality buffer amplifiers feed the three pairs of the four rear-panel RJ45 OUTPUT jacks at the...
10 off RB-RK1 Rack-Kits
Dual Stereo To Mono Converter
Xtreme Full Duplex Industrial Wireless Intercom System W/ 2 Dual Speaker Headsets
Monitor Light Controller 3 Button REH-STANDBY-TX
10 off RB-RK2 Rack-Kits
Stereo Headphone Amplifier (1U)
Single Microphone Amplifier
The 810 is a high-performance composite video and s-Video (Y/C) color bar and 1kHz audio tone generator. It outputs two composite video and one s-Video color bar signal in either NTSC or PAL, and a 1kHz audio tone simultaneously.
ALTAIR "ES-201" has been designed in response to the increasing demand of in-wall intercom panels for fixed installations such as theatres, factories, stadiums, etc. This unit allows full communication with one intercom channel.
Line Power Telephone Balance Unit
The DPA MMP-A Preamplifier is a transformerless preamplifier and output stage for DPA Reference Standard MMC series capsules.
The 907xl is a high-performance power amplifier for line-level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced stereo signal on RCA connectors. It delivers 40 watts per channel into an 8 ohm load.
Dual Stereo Headphone Amplifier (1U)
Dual Stereo RIAA Phono Amplifier
The RU-PA518 audio power amplifier offers operation in either stereo or bridged-mono mode, providing from 5 watts to over 18 watts of RMS output power, all in a 1/3 rack size unit. RDL's advanced circuitry provides professional-quality audio with a built-in peak limiter. Gain controls for each channel are on the front-panel for quick and easy adjustments.
The RU-TPDA Active Distributor is a four output signal and power distributor module compatible with RDL Format-A twisted pair products. The Input RJ45 jack accepts a twisted pair cable originating from one or multiple Format-A senders. The Loop Out connector permits the input signal to daisy-chain to additional distributor modules.
The HD-PA35A is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord)
The HD-PA35U is a single input audio amplifier for systems demanding the highest energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord).
High Power 8 Channel Headphones amplifier, 1U
Lieferzeit binnen 4 bis 6 Wochen
Class-D mixer amplifier, switchable for Lo-Z (3Ohm/4Ohm/8Ohm / 30W x 2 Ch.) or Hi-Z (70V/100V / 60W x 1 Ch.)
Single Stereo Bi-Directional Matching Converter
Dual Stereo Unbalanced to Balanced Converter
The AVN-HD1 has the feature set of the AVN-HA1 however it is for digital I/O and therefore only compatible with the AVN-PD8 models.
Intercom mini beltpack 1 channel "Tubecom" (XLR NC4-FX headset)
Omnidirectional antenna (360°H x 25°V) Out
Digital Video Sync Board For RB-SC2 (HD-SDI, SD-SDI)
Table stand including gooseneck
The FP-ALC1 is the ideal choice in many applications where consistent mono audio levels are needed from professional sources with varying audio output levels. Power connections are made using either the full-size barrier block or a dc power jack located in one end panel.
With four DI models and advanced multi-effects, the B6 gives you freedom to explore entirely new sounds. Our new analog circuit, combined with the DI section vastly improves the low-frequencies of your instrument. With an 88.2 kHz effects processor, double the rate of others, the B6 has your high end covered. We meticulously modeled four iconic DI boxes...
The TX-PA40D 40 Watt Stereo Amplifier is a compact, yet powerful solution for driving 4 or 8 ohm speakers. The TX-PA40D is well suited for applications where fixed amplification is needed, and variable gain is provided from the source. Includes: Amplifier, Power Supply (without Power Cord).
PA-50HZ (PA-50Z) is a compact Hi-Z (70V/100V) power amplifier with line-level output, ideal for small to medium-size meeting spaces and classrooms.
Intercom 4 wire 2 wire interface
The Sonifex AVN-DIO02 is a XLR analogue stereo input to dante audio interface.
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones. Two identical circuits are provided, with connections through XLR jacks.
The versatile RDL FP-PA35A is a 35 W, mono, class D power amplifier ideal wherever a small, high quality amp with high efficiency is needed. Offering amplification for 25, 70, or 100 V speakers and a compact all metal enclosure able to be mounted practically anywhere; this unit will prove to be a great solution for numerous applications.
The AV-DC4 is a mono transformer-coupled audio divider/ combiner module for use with balanced, low or high impedance audio inputs and outputs. Input and output connections are provided on XLR jacks with gold-plated contacts. The AV-DC4 features four identical channels. Each channel may be used as either an input or as an output. Two XLR jacks are provided...
The HD-PA35 is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord)
The AVN-DIO08 is a Dante to AES3 digital input and output audio converter in the Sonifex DIO range of Dante input/output devices.
The Sonifex AVN-DIO06 is a dante to AES3 XLR stereo input & output audio interface. The AVN-DIO06 is a simple plug and play audio interfaces provide a convenient and elegant method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network
The AVN-DIO07 is a Dante to AES-3id digital input and output audio converter in the Sonifex DIO range of Dante input/output devices.
UltraLITE 2 person system w/ 1 Single 1 Double Headset, batteries & case
The AVN-DIO01 is a Dante AoIP network to analogue XLR stereo output converter in the Sonifex DIO range of Dante input/output devices.
The FP-DCC1 is a compact 12VDC to 24VDC power converter that allows you to power 24VDC devices with a 12VDC source. The compact metal design features ground-referenced terminal block and DC jack power outputs with 2 separate advantages. The DC jack and one terminal block are high-current outputs, while the other terminal block is a low-noise output.
Extension for bluetooth headset (or phone)
Modular active cable, MicroDot, rear, 1.8m
Modular active cable, MicroDot, side, 1.8m
The d:dicate MMP-ER Modular Active Rear Cable by DPA Microphones is a microphone preamp. It is used with any d:dicate modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics.
The d:dicate MMP-ES Modular Active Side Cable by DPA Microphones is a microphone preamp. It is used with any d:dicate modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics.
Line Powered Telephone Line Listen Unit
Power amplifier, 2x750Watt RMS
Lieferzeit binnen 2 bis 3 Wochen
The EZ-AFC2 is a stereo bi-directional audio format converter with level controls. Conversion is provided between balanced rear-panel XLR jacks and unbalanced front-panel RCA jacks. LED VU metering is provided for all audio channels facilitating adjustment for high or low input levels. Includes worldwide power supply (specify plug).
The FP-PA18 is a high efficiency 18 W power amplifier with a line input, 8 ohm output, integral audio compressor and an automatic sleep mode. The FP-PA18 features a balanced line level input that may be connected unbalanced. A gain control located next to the terminal block is designed to be adjusted manually or with a trimming screwdriver.
4 Volume & 4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series.
Remote Switch Panel For RB-DS2 (1U)
200' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
The Sennheiser CHG 70N + PSU KIT is a network-enabled charger with two bays, capable of simultaneously charging up to two EW-DX SKM handheld and/or EW-DX SK bodypack transmitters with their respective BA 70 batteries inside.
C-MOD Interface for Blackmagic
EVADE C-MOD Interface for PortaCom
EVADE C-MOD Interface for RTS
EVADE C-MOD Interface for Telex
The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment. The thermal characteristics of the module case and construction throughout using high temperature components permit operation over a range of 0 to 70 degrees C.
The 900xl is a high-performance power amplifier for line level stereo audio signals. The unit accepts unbalanced audio signals on either of two RCA or 3.5mm connectors and delivers a speaker output of 10 watts RMS per channel into a 4 ohm load.
This device will act as the main control unit for all the devices connected to the cue light channel. Cue light systems tipically consist of an emitor and one or several receivers that will display a few light indications (usually red/green) activated from the main control unit.
The RU-EQ3 is a three band, shelving single channel EQ and features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ohm balanced, and is intended to drive unbalanced or balanced lines of 150 Ohm or higher impedance.
The EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel 1/4" jacks. One input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a dual 1/4" jack (for "loop out" connection) are provided for connecting the input source. Includes worldwide power supply...
The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels. Gold contact XLR jacks are utilized for the balanced input channels. Each output is unbalanced, connected through a gold-plated phono jack. A level trim potentiometer is provided for each...
Intercom beltpack with flasher (XLR NC4-FX headset)
Single 3 Way Passive Microphone Splitter
The FP-TP4PW 4 Output Power Inserter is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 VDC power supply using either the power jack or the detachable terminal block. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules...
The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels. The RU-UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line-level...
The ABX-4 enables digital audio signals (AES/EBU) and control signals (FOHHN-NET) to be separately transmitted from the AIREA-NET. The AIREA-NET will not be overloaded (AIREA-NET-LOAD = 0 W) since the ABX-4 functions as a passive breakout box
The Presonus Studio Channel is a channel strip that features a tube preamp, a VCA compressor, and a 3-band parametric EQ. The tube preamp section features two knobs: Gain and Tube Drive. This allows you to adjust the amount of signal that hits the tube circuitry, opening up a wide range of sonic options.
Intercom System, Power Supply
The AVN-HA1 headphone amplifier has been designed specifically to connect to the AVN-PA8 and AVN-PM8 models to provide headphone amplification with volume control.
Class-D mixer amplifier, switchable for Lo-Z (3Ohm/4Ohm/8Ohm / 30W x 2 Ch.) or Hi-Z (70V/100V / 60W x 1 Ch.)
1- UltraPAK, 1-Max 4G Double & 1-Battery
Intercom Power Supply for Basic Systems
Interface for HUB - Telex
Interface for HUB - RTS
Interface for HUB - ClearCom
Intercom beltpack 2 channels 2 x XLR 5 poles (XLR NC4-FX headset)
The DPA MMP-C Compact Preamplifier is a preamplifier and output stage for DPA Reference Standard MMC series capsules.
Network compatible charger with two individual charging compartments. Compatible with EW-DX SKM, SK, BA 70. Includes CHG 70N-C, quick start guide, safety instructions.
1- UltraPAK, 1-Max 4G Single & 1-Battery
The ST-VP2 Automatic Ducking Module is a device designed to cut out music when a page is played over your audio system and automatically fade the music back into play when the page is finished. Use of the unit requires a line-level music source from a receiver, satellite decoder, tape, or CD source.
The Altair ER-200 is the new Cue Light system's new light indicator receiver. It is suitable for applications that require precise coordination between different professionals. This independent Cue Light receiver connects to the EC-200 master panel, receiving power for operation through the signal cable itself.
Intercom beltpack 2 channels 2 x XLR 3 poles (XLR NC4-FX headset)
The STA-2A Dual High-Gain Line Amplifier is a dual-channel line-level audio preamplifer. This unit offers up to 24dB gain in audio lines. Conversion between balanced and unbalanced audio is possible, as is conversion between high and low impedance.
The Zoom G6 features jaw dropping effects, powerful amp modelling and more sonic capabilities than ever before. Your tones can be complex but creating them shouldnt be. With user friendly application driven technology, the G6s 4.3-inch color touchscreen lets you drag, drop and swipe your way to new sounds.
The Monitor Station V2 from PreSonus is a desktop studio control center that allows you to switch between three sets of studio monitors and three input sources. It also features a built-in headphone amplifier with four 1/4" headphone outputs, each with dedicated level control. These features make the Monitor Station V2 suitable for a variety of recording,...
The HP60 from PreSonus is a versatile six-channel headphone mixing system ideal for live or studio applications. This rack mountable unit contains six independent headphone amplifiers for strong, clear audio. Two stereo inputs and an external input allow you to mix the output between three audio streams.
100' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
The ST-UBA2 Unbalanced to Balanced Amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. The mono sum output may be used to drive patch-bay...
1- UltraPAK, 1-Monarch & 1- Battery
Big Knob Studio Plus Monitor Controller and Interface from Mackie is a monitor-control solution and interface, that allows you to choose between four audio-input sources and three monitor pairs
Lieferzeit binnen 2 bis 3 Wochen
The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/4" jack are provided for connecting the input source. Includes worldwide power supply (specify plug).
The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Both a 70 V and 100 V amplified output are provided to drive...
Directional antenna 85°H x 65°V (-3dB)
Audio delay processor, intended for mobile, ease to use of Audio & Video Synchronization, with a common 3.5mm audio input. Switchable between microphone +40dB, +20dB and audio line input, come with Condenser/Dynamic Microphone switchable, and audio gain control.
Lieferzeit binnen 3 bis 4 Wochen
The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The output will drive an 8 Ohm speaker or multiple speakers connected to...
Digital Controller Hub, divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines
The FP-PA20B features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. A 25 V amplified output is provided to drive corresponding speakers in...
Like its little brother, the AC-3 Acoustic Creator is an enhanced direct box with essential DI features that help you achieve great tone no matter where you play.
Charger for 4 beltpack series 200
Charger for 4 beltpack series 210 (USB)
The ST-DA3 distribution amplifier is part of the "Stick-On" series and includes durable adhesives for permanent or detachable mounting. The ST-DA3 allows bridging of any audio line, gain adjustment, and signal distribution to three balanced or unbalanced outputs.
Remote control for MAP units
The ULR1 works in the opposite way to the CM-LUR1, whereby it allows the connection of a stereo unbalanced line input via dual RCA phono sockets, and outputs a stereo balanced line level signal via RJ45 with 'StudioHub+' pin-out.
This product allows the connection of a stereo unbalanced line input on phono connectors to a balanced line output via 2 x male XLRs.
This unit is a passive version of the RB-LU4 (though only 1 x stereo channel), and provides you with an alternative to having to interface a balanced output to an unbalanced input via specialist cables (either by shorting the non-phase to ground or disconnecting it).
This product has the same specification and feature set as the CM-LUR1, however the stereo analogue inputs are on balanced 3-pin XLRs as opposed to RJ45 connector.
The STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kilohm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A multi-turn trimmer is user adjustable for either gain or loss in order to match the facility standard microphone levels.
The ST-VP1 Voice-Over & Paging Module is a device that allows you to do voice-over paging with controls for fade and cut. It allows you to choose between (2) input audio sources. The unit is also well suited for voice-overs that require precise and consistent fade levels. This model can be configured for automatic operation when used in conjunction...
The EZ-ADA4 is a stereo audio distribution amplifier with gain adjustment and audio level metering. The input is connected through RCA jacks or a MINI jack. A front-panel knob adjusts for high or low input levels using the left and right channel LED VU meters. Four stereo outputs are provided on RCA jacks.
Introducing the SPD-1 Power Distribution Box, the perfect solution for managing power in a sound bag or on a sound cart. This powerful and versatile device is designed to make your life on set easy and stress-free.
The TX-PCR1 Paging Controlled Relay is ideal for local speaker muting during an area page and can be used for controlled switching of constant-voltage audio sources. The detachable terminal block has inputs for 25, 70, or 100V systems. The Slave output can be used to control other modules or the DPDT relay can switch speaker loads.
Intercom Flasher
Belt pack is made of sturdy aluminum alloy housing making it much durable in touring.
1- UltraPAK, 1-Cyber & 1- Battery
Single 3 Way Passive AES3ID Splitter With BNC Connectors
Single 3 Way AES/EBU Passive Splitter With XLR Connectors
The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. Includes worldwide power supply (specify plug).
The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B and C of the twisted pair cable are summed to mono and amplified.
Analogue Video Sync Board For RB-SC2 (PAL, NTSC, SECAM)
The ST-GCA3 Auto Gain Control Amplifier constantly adjusts audio levels so you always maintain the correct output. The adjustment rate is switch-selectable so you get an even greater amount of control. The SLOW mode works best at leveling music sources, while the FAST mode is ideal for changing conditions that require instant adjustments.
The ST-SH2 is a miniature wall and surface mount stereo headphone amplifier. The unit is used for installation applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
The ST-PA18 is a high-quality compact audio power amplifier designed for use with an eight Ohm speaker system. It offers 18W of RMS power. It features screw terminal connectors, and can accept balanced or unbalanced input signals. A loop output is also provided for connecting additional amplifiers.
The ST-MPA48 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. Therefore, the ST-MPA48 can convert any existing mic input...
The ST-CX2 is a miniature wall and surface mount two-way crossover, designed to drive audio power amplifiers. The input and outputs are balanced, but may be connected unbalanced if necessary.
The ST-CX2S is a miniature wall and surface mount subwoofercrossover, designed to drive audio power amplifiers. The input features two separate isolated balanced-bridging inputs, each of which can be wired balanced or unbalanced.
The 900N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel into a 4 ohm load.
The ST-HP3 is a miniature wall and surface mount dual high-pass filter, and is the ideal choice where line-level audio filtering needs to be provided at the input of a power amplifier for protection of public address horns against damage from low frequencies.
The ST-GLA1 Gated Line Amplifier & Noise Gate is a device that allows you to produce an automatically switched line-level signal with integral noise reduction. The unit can be used as a stand-alone solution or combined with other RDL modules to produce a custom mixing system. It features an open-collector slave output that can be used to trigger other...
The ST-VCA3 Voltage-Controlled Amplifier provides smooth audio-level control from a remote control panel, allowing you to adjust voltage from 0 to 10VDC. Use this unit when you need to keep audio sources and components isolated in rack, but want to extend audio controls outside of the rack and eliminate scratchy audio.
AES/EBU Sync Board For RB-TGHD(B or X)
Word Clock Sync Board
Intercom System, Headsets (Double Muff)
Big Knob Studio Monitor Controller and Interface from Mackie is a monitor-control solution and interface, that allows you to choose between three audio input sources and two monitor pairs
Lieferzeit binnen 2 bis 3 Wochen
1- UltraPAK, 1-Edge Headset & 1-Battery
The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected.
The TP-HA1A Format-A Stereo Headphone Amplifier is designed to allow someone to listen to music via headphones over an RDL Format-A sender system. The amplifier features two RJ45 ports, either of which can receive both the power and the audio signal to the amplifier. The second RJ45 port can be used to connect additional headphone amplifiers or another...
The FP-TP4PW 4 Output Power Inserter is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 VDC power supply using either the power jack or the detachable terminal block. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers.
The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA3. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA3s.
The STA-1M is a high quality, miniature wall and surface mount, mono-audio amplifier, designed for use in situations where balanced/unbalanced configuration conversion, impedance conversion, and level boost or cut are required.
Guitar FX & Amp Simulator, 3D Z-Peda
The GB6 Ground Bar from RDL is a small metal bar designed to ground equipment. It is constructed from alloy copper and can be used to mount up to (6) TS-1D suppressors. Use this unit to protect your equipment from electrostatic discharge, induced transient voltage, RF interference, and electromagnetic pulses.
The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines. Single or multiple units are typically mounted to good earth ground at the location that audio lines enter or exit an equipment rack. This protects wiring inside the rack against the effects of induced electrostatic discharge (ESD),...
Intercom beltpack 1 channel (XLR NC4-FX headset)
The 106 is a high-quality distribution amplifier for balanced mono microphone signals. It takes one dynamic or condenser microphone input and distributes the signal to two line-level outputs.
Intercom System, Headsets (Single Muff)
UltraLITE Double Master Headset w/ Rechargable Lithium Battery
The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering. Stereo RCA jacks and a grounding screw are provided on the rear panel for connecting a turntable tone arm. The input is preamplified with RIAA equalization to feed the line output RCA jacks. Includes worldwide power supply (specify plug).
The Zoom B3n lets you create your own original sound, no matter the kind of music you play. This bass pedal has countless amp, cabinet, and stompbox effects that you can use on stage or in the studio. Plus, its editing features are simple enough that you can tweak your sound even when you're on the road
2-bay table top charger with power supply for the evolution wireless D1 series.
Amplify your acoustic sound with the Zoom AC-2 Acoustic Creator.
The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load. Input and output connections are provided on XLR jacks with gold-plated contacts.
The RDL EZ-HK3 Audio / Video Hum Killer is a high-quality video transformer isolation module. It's designed specifically for use with unbalanced high impedance audio inputs and 75 ohm composite video. The device features both input and output connections on gold-plated RCA jacks.
The ST-EQ3 is a miniature wall and surface mount three-band equalizer that features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ohm balanced, and is intended to drive unbalanced or balanced lines of 150 Ohm or higher impedance.
The ST-PA6 is a professional-quality audio power amplifier with a two inputs and a single eight Ohm output, which delivers 6W RMS to an eight Ohm speaker. All connections are made via screw terminals. Each of the inputs is a balanced bridge, with both inputs being actively mixed equally. Simple gain and bass EQ controls are provided.
The EZ-PD3 Power Supply Distributor from RDL is used where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to three EZ modules from a single power supply. Upon application of power, the EZ-PD3 ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage...
Whether youre streaming, recording, or collaborating online, the V3 is packed with effects, harmonizing options, pitch correction and more.
The RDL EZ-HK2 Composite Video Hum Killer is a high-quality video transformer isolation module. It's designed specifically for use with 75 ohm composite video. The device features both input and output connections on gold-plated RCA jacks. Each input jack is electrically isolated from the case itself, as well as from the output ground.
50' Extension Cable for HUB with 3.5mm Male TRRS to Female TRRS
The TX-PSD1 Paging Sound Detector is ideal for switching sources from within a constant-voltage system. This module is triggered when the threshold is exceeded and can remain open for 3-25 seconds (user programmable).
Dial Tone Detect Add-on Board
Digital Control Panel, 1 Knob, 4 Switches
The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals.
The AV-HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated phono jacks. The AV-HK1 is supplied with two adapter cables to facilitate connecting with products that use mini-plugs and jacks.
The RDL EZ-HK1 Stereo Audio Hum Killer is a stereo audio transformer isolation module. It's designed specifically for use with unbalanced, high-impedance audio inputs. The device features both input and output connections on gold-plated RCA jacks. Each input jack is electrically isolated from the case itself, as well as from the output ground.
Mackie MDB-USB is a USB-powered stereo DAC direct box designed to connect stereo a signal from USB to microphone preamps for DJs, producers, musicians, and audio engineers in recording sessions, clubs, houses of worship, and live stage applications. It converts a stereo digital audio feed at up to 24-bit/96 kHz resolution via a USB 2.0 Type-B input to...
Lieferzeit binnen 2 bis 3 Wochen
The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output. This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a single-speaker monitor amplifier.
The ST-LEQ1 Loudness Equalizer (VCA Compatible) is a device designed to equalize loudness. It features (2) line-level audio inputs and a single line-level audio output. This unit allows you to adjust loudness contour to follow volume, improve aural flatness at low levels, and define loudness equalization.
6 x powerCON TRUE1 TOP and powerCON TRUE1 TOP In with IP65 Power Strip XO
The PT-102AN is a high-performance audio distribution amplifier for unbalanced stereo signals. The unit takes one stereo input and distributes the signal to two identical stereo outputs.
The TX-MX2R is a compact, high-quality unit that offers active, isolated mixing of two unbalanced line-level audio sources and output to one or two unbalanced destinations. The unit may be used to send a stereo signal to two mono outputs or to mix 2 separate mono inputs into a single output.
The S 95 is an intelligent lithium battery that Deity specially developed for the reliable power supply of sound recorders. It works reliably in a wide range of environments and conditions.
The ST-PD5U Switching Supply Distributor is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to five modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current...
Intercom 5 pin to 3 pin splitter/combiner
1 Stereo Codec/Opus Encode/Decode Option for Portals
Guitar FX & Amp Simulator, 107 FX, 3 sim. FX, 24bit/44,1kHz
This Floor Cable for EasyCom from Eartec is a 100' floor cable designed for use with an EasyCom intercom system. It has a 3-pin XLR male connector on one end, and a 3-pin XLR female connector on the other.
Acoustic Guitar Multi-Effects Processor w/out PSU AD16E
4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series.
Rechargeable Lithium ion battery pack for STAGEPAS 200.
The TX-1W is a high-quality compact amplifier designed to feed music or voice signals to a telephone system.
Match Transformer with 2 separated secondary inputs (+4 dBu & -10 dBV) primary output +4 dBu
The HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. It is designed with four discrete headphone outputs on the front panel, each with its own volume potentiometer and 150mW of amplification per channel.
The ST-FS6 is used in applications where an excessive RF level is induced in the audio cables producing audio interference in the system. It is not necessary to use all 6 input/ output channels, and wiring configurations may vary according to the application.
Transformer for DA-410 (OUT)
The ST-PA2 is a professional-quality utility amplifier with a single input and two outputs. All connections are made via screw terminals. The first output delivers 2W RMS of power to an 8 Ohm speaker, while the second output is designed to drive 600 Ohm transformers. This makes the unit great for music-on-hold systems, which may have either 8 or 600 Ohm...
Guitar FX & Amp Simulator, 107 FX, 3 sim. FX, 24bit/44,1kHz
Monarch Dual Ear Backband Headset For ComPak Belt Pack
AES/EBU Snake, DB25 to 4 x XLR3M and 4 x XLR3F, 3m (AVN-PD8 2 x I/O Combo)
Acoustic Guitar Multi-Effects Processor w/out PSU AD16E
Extend ITC-300 cables to 200 meters. The standard Ethernet cables between ITC-300 and ITC-300SL (beltpack) can reach up to 100 meters. VP-300R extends that distance to 200 meters whilst being a passive device
Lieferzeit binnen 3 bis 4 Wochen
BirdDog Dante NDI Bridge
Lieferzeit binnen 1-2 Wochen
Microphone Charger Base for Dual Channel Executive HD System
Docking station for charger L 6000, usable for 2x BA 70
Max 4G Double 4 Pin XLR Female connector
Max 4G Double 4 Pin XLR Male connector
Max 4G Double 5 Pin XLR Female connector
Max 4G Double 5 Pin XLR Male connector
Charging kit for EW-D. Includes (1) L 70 USB charger, (2) BA 70 rechargeable batteries and (1) NT 5-20 UCW power supply
Transformer for DA-410 (IN)
Antenna cable splitter
Unbalanced Input Transformer. Unbalanced stereo inputs to summed balanced mono output. Mix two unbalanced audio signals to mono balanced. Combine stereo into mono with balanced output. Unbalanced to balanced conversion without gain. Hum cancellation on unbalanced line inputs. Frequency response 30 Hz to 20 kHz (+/- 1 dB).
The TCSSP3 Splitter Cable from Eartec is a high-quality splitter cable intended for use with a TCS intercom system. It features a female XLR connector on one end, and two male XLR connectors on the other.
Max 4G Double Kenwood 2 Pin Plug Inline PTT
The SGV-6 Vocal Mic is a highly directional shotgun vocal microphone designed to isolate your voice by suppressing sounds from other instruments on stage and other ambient noise, which can leak into a traditional mics signal.
Bass Multi-Effects Processor w/out PSU AD16E
Guitar Multi-Effects Processor w/out PSU AD16E
Plug-in mains unit with country-specific adapter for antenna combiner AC 3 and charger L 2015
Charging module for two BA 60 battery packs for SKM 9000 and SKM 6000
Charging module for two BA 61 battery packs for SK 9000 and SK 6000
Soft case for beltpack series 210
9-Port Multi-Charger with European Plug Adapter
A DC Power Supply for AVN Range, 4 pin XLR socket, 60W for use with AVN-CU2-DANTE and AVN-CU4-DANTE Commentator Units.
Single Stompbox for Guitar, 47 FX, 50 Presets
Single Stompbox for Bass,58 FX, 50 Presets
Single Stompbox for Guitar, Chorus/Deayl/Reverb
Audio Transformer +6dBu
Balanced Snake, 8 x XLR3F to DB25, 3m (AVN-PA8 2 x Input)
Max 4G Single 5 Pin XLR Female connector
Max 4G Single 5 Pin XLR Male connector
Max 4G Single 4 Pin XLR Male connector
Max 4G Single 4 Pin XLR Female connector
Monarch 4 Pin XLR Female connector
The HP2 from Presonus is a battery-powered personal headphone amplifier with volume and pan control for driving wired in-ear monitors as well as headphones. It can be used by musicians and performers in applications such as live stage, theater, rehearsals, and more.
DC Power Supply for AVN Range, 60W
Wall mounting bracket for SpeechLine Digital Wireless multichannel receiver
Soft case for beltpack series 200
The Mackie CR3-X is a pair of Creative Reference Series 3" Multimedia Monitors offering a compact solution for quality audio playback in home studios and gaming setups. With 50W of amplification driving 3" woofers and 0.75" tweeters, the CR3-X monitors work well, whether you're creating content or casually enjoying some tunes.
Lieferzeit binnen 2 bis 3 Wochen
Max 4G Single Kenwood 2 Pin Plug Inline PTT
Monarch Headset Motorola 2 Pin Plug Inline PTT
Balanced Snake, DB25 to 8 x XLR3M, 3m (AVN-PA8 2 x Output)
Rack for SWR2100P and SWR2311P series
Charger Base for HD Single Channel
Monarch 5 Pin XLR Female connector
Monarch Headset Kenwood 2 Pin Plug Inline PTT
Monarch 4 Pin XLR Male connector
Monarch 5 Pin XLR Male connector
Cyber 4 Pin XLR Female connector
Guitar Multi-Effects Processor w/out PSU AD16E
Bass Multi-Effects Processor w/out PSU AD16E
Remote volume control for MA amplifiers
Antenna support for 1 or 2 antennas
Optional Mounting kit to install 1 or 2 x ES-203CL / ES-201 in a 2 RU space
The Eartec FC50 is a high-quality interconnect cable designed to go from a TCX hybrid intercom to a BP-101 beltpack. It has male and female four-pin XLR connectors.
Desk top wireless charging device
The Yamaha RM-MTL is an accessory kit for use with the ADECIA communications system that allows you to mount the RM-CR processor discreetly under a desk or table-keeping your conference space neat and clean. The kit includes a mounting bracket and four screws.
32 Ohm, right angle mono plug
Lieferzeit binnen 4 Wochen
Front Panel Convert Kit, Digital GSM & POTS TBU, Twin Rack Mounted
Front Panel Convert Kit, Digital HD Voice & POTS TBU, Twin Rack Mounted
Front Panel Conversion Kit, DHY-04G or DHY-04GS to DHY-04GT
Front Panel Conversion Kit, DHY-04G or DHY-04GS to DHY-04GT
Balanced Snake, DB25 to DB25, 3m (AVN-PA8, AVN-PD8)
Front Panel Conversion Kit, DHY-04 or DHY-04S to DHY-04T
Front Panel Conversion Kit, HY-03 or HY-03S to HY-03T
Power Supply for HD Single/Dual Base Station or Charger Base
Cyber with 4 Pin XLR Male connector
Cyber 5 Pin XLR Female connector
Cyber with 5 Pin XLR Male connector
Professional studio transformer 1:1 for PCB mount, fully shielded. Applications: line input
Professional studio transformer 1:1 for PCB mount, fully shielded. Applications: mic input, splitting
Mackie MDB-2P is a stereo passive direct box designed to connect two mono instruments or a single stereo instrument to microphone preamps for musicians and audio engineers in recording sessions, houses of worship, and live stage applications. It converts high-impedance, instrument-level signal via its 1/4" TS unbalanced inputs to low-impedance, mic-level...
Lieferzeit binnen 2 bis 3 Wochen
Mackie MDB-1A is an active direct box designed to connect a single instrument such as a guitar, bass, or keyboard to a microphone preamp for musicians and audio engineers in recording sessions, houses of worship, and live stage applications. It converts a high-impedance, instrument-level signal via its 1/4" TS unbalanced input to a low-impedance,...
Lieferzeit binnen 2 bis 3 Wochen
Professional studio transformer 1:4 for PCB mount, fully shielded. Applications: mic input step-up.
Front panel kit to convert PS-AMP to PS-AMPT
Front panel kit to convert PS-PLAY to PS-PLAYT
Front panel kit to convert PS-SEND to PS-SENDT
A separately sold bracket for rack mounting an MA/PA series power amplifier.
Remote volume control for MA amplifiers Print
This Floor Cable for EasyCom from Eartec is a 25' floor cable designed for use with an EasyCom intercom system. It has a 3-pin XLR male connector on one end, and a 3-pin XLR female connector on the other.
The PS-1202 is a desktop power supply that provides 12V DC, 2A power to compatible devices.
The PS-504 is a desktop power supply that provides 5V DC, 4A to compatible devices.
Mackie MDB-1P is a passive direct box designed to connect a single instrument such as a guitar, bass, or keyboard to a microphone preamp for musicians and audio engineers in recording sessions, houses of worship, and live stage applications. It converts a high-impedance, instrument-level signal via its 1/4" TS unbalanced input to a low-impedance,...
Lieferzeit binnen 2 bis 3 Wochen
Big Knob Passive Studio Monitor Controller from Mackie is a monitor-control solution that allows you to choose between two audio sources and two monitor pairs
Lieferzeit binnen 2 bis 3 Wochen
Front Panel Convert Kit, DHY-04HD to DHY-04HDS
Front Panel Convert Kit, DHY-04G to DHY-04GS
Front Panel Convert Kit, DHY-04 to DHY-04S
Front panel kit to convert PS-SEND to PS-SENDS
Front panel kit to convert PS-PLAY to PS-PLAYS
Front panel kit to convert PS-AMP to PS-AMPS
Front Panel Conversion Kit, HY-03 to HY-03S
Redbox RB-HD1 or RB-DAC1 front panel, no 19 inches rack mount
Redbox RB-HD2 front panel, no 19 inches rack mount
XLR Gooseneck microphone for ITC-100. Two year warranty after registration on Datavideo's official website.
Lieferzeit binnen 3 bis 4 Wochen
Headphone Amplifier/Distributor for 4 Headphones
Redbox front panel, no 19 inches mount, for RB-ADDA, UL4,BL4,LU4
Commentator Unit Front Cover Plate
Deity's DQC-1 charger is designed to charge smart batteries (SMBUS) using any standard USB charger. The very small, easy-to-use smart battery unit is protected by a robust, durable metal housing. In addition to a 5-pin battery connector, the device offers a USB-C port with 45W fast charging and supports mainstream protocols.
Front Panel Convert Kit, DHY-04HDS to DHY-04HD
Front Panel Convert Kit, DHY-04S to DHY-04
Front Panel Convert Kit, DHY-04GS to DHY-04G
Front panel kit to convert PS-SENDS to PS-SEND
Front panel kit to convert PS-PLAYS to PS-PLAY
Front panel kit to convert PS-AMPS to PS-AMP
Desk top wireless charging device
Presenter Controller Mic Mount Bracket
Mackie M48 is a phantom power supply designed to provide 48 VDC phantom power to a single microphone for musicians, producers, and audio engineers in live stage applications and home, project, and mobile-recording studios
Lieferzeit binnen 2 bis 3 Wochen
Keep your Wireless GO II microphone system safe and fully powered with the Wireless GO II Charging Case from RODE, a handy accessory that features a rechargeable internal battery that can facilitate up to two full recharges for up to 30 hours of continuous use in the field.
HUB 3.5mm TRRS Cable
24 Vdc Switching Power Supply, Interchangeable AC Plug, 1 A, dc Plug
LP-1 is a gooseneck light for ITC-100. Two year warranty after registration on Datavideo's official website.
Lieferzeit binnen 3 bis 4 Wochen
Cyber Headset Kenwood 2 Pin Plug Inline PTT
Cyber Headset Motorola 2 Pin Plug Inline PTT
SST Headset Kenwood 2 Pin Plug Lapel Microphone
Desk top wireless charging device
Front Panel Conversion Kit, HY-03S to HY-03
The APE30RS Acoustic Pressure Equalizer, 30mm Ball for 4006A and 4006C Microphone from DPA Microphones is for modifying a microphone's on-axis and off-axis frequency response.
The APE40RS Acoustic Pressure Equalizer, 40mm Ball for 4006A and 4006C Microphone from DPA Microphones is for modifying a microphone's on-axis and off-axis frequency response.
The APE50RS Acoustic Pressure Equalizer, 50mm Ball for 4006A and 4006C Microphone from DPA Microphones is for modifying a microphone's on-axis and off-axis frequency response.
It's a volume pedal, a wah pedal and a pitch bender, all in one. Plug the FP02M into your Zoom guitar or bass effects device to add real-time control over volume, wah or pitch, as well as effects parameters such as modulation rate, distortion gain and delay or reverb level.
Desk top wireless charging device
Desk top wireless charging device
1U Front Rack Kit For Small Redboxes
1U Front Rack Kit For Small Redboxes (Black)
AVN-TB6 Talkback Intercom 19" Rack Plates
1U Rear Rack Kit For Small Redboxes, eg RB-BL2
Convert your pair of NTH-100 headphones into a headset with the NTH-Mic Detachable Boom Microphone from Rode and get clear, intelligible, broadcast-ready voice quality for media, content creation, streaming, and gaming. The mic plugs directly into the 3.5mm jack on the earcup and features a 4.8" boom to precisely situate the omnidirectional...
One Set of Custom Button CAPS Printed
Sonifex Desk Mount Bracket is designed for AVN-MPPR Presenter Controller.
1U Rear Rack Kit For Large Redboxes, eg RB-DA6
Charger for BA 70 batteries, 2 locations, can be connected in chain. Includes (1) NT 5-20 UCW power supply
12V DC/2A Open Head Power Supply
Infrared remote control for MAP units
Wireless intercom base station antenna
The PS-200 power supply can be mounted with an optional blank ear panels OR-1-200 set for rack installation. They are installed w ith the same PS-200 top cover screws.
24 Vdc Switching Power Supply, Interchangeable AC Plug, 500 mA, dc Plug
Replacement Battery
Rechargeable 3.7 Volt Lithium Polymer Battery
AVN-DIO Large Unit Belt-Clip Kit
Miniature transformer balancing adapter, 3 pole XLR female - RCA / phono socket, red coded
Miniature transformer balancing adapter, 3 pole XLR female - RCA / phono socket, black coded
Miniature transformer balancing adapter, 3 pole XLR male - RCA / phono, red coded
Miniature transformer balancing adapter, 3 pole XLR male - RCA / phono socket, black coded
HUB Interlink Cable
Rechargeable battery for EW-D SK bodypack and EW-D SKM-S handheld transmitters, Li-ion
Power supply for active antenna splitter EW-D ASA
Deity FB-NP-F550-DT Rechargeable Battery.
Miniature transformer balancing adapter, 3 pole XLR female - 1/4 inches jack, ground lifted
Miniature transformer balancing adapter, 3 pole XLR male - 1/4" Jack, ground lifted
Bluetooth Adapter for AR-48
Lockable Power Supply 12V DC for R20
1U Pannel to seize 4 Interfaces/Beltpacks
Tool for Replacing Button Caps
All of the Passive Packs, along with the CM-TBU and CM-TLL, can be mounted to the underside of a desk using the CM-MNT1 desk mount plate.
Power supply 12V 1A
Speaker 125 Ohm
Lieferzeit binnen 4 Wochen
Speaker 32 Ohm
Lieferzeit binnen 4 Wochen
Remote control as replacement device for the seamless switcher CA-HT-SC-BigOne-TX.
ComStar Replacement Microphone Cover
Cyber Replacement Microphone Cover
HD Field Replaceable Microphone Battery for HD Microphones
UltraLite Cloth Replacement Ear Pad (Bag of 2)
AC Adapter, 5V DC, 2A. USB C, USB Micro-B, DC voltage barrel connector.
Lieferzeit binnen 4 bis 6 Wochen
The FS01 is a momentary foot switch for Zoom guitar and bass effects devices that allows you to bypass effects, turn the tuner on or off, enable the delay hold function and mute the delay input, as well as providing tap tempo input for rhythms, the looper and various effects parameters.
SST Replacement Clear Ear Tubes
12 Volt vehicle adapter for Mini HUB & 2 Port Multi Charging Base
12 Volt vehicle adapter for 8 Port Multi Charging Base
Two black, powder-coated 19 inches mounting brackets for the Seamless Switcher CA-HT-SC-BigOne-TX with 1 RU. The brackets come with 8x mounting screws.
Power Supply TC Bar M
Power Supply TC Bar S
10 Port AC Adapter
C-MOD Interlink Cable
This Power Adapter for EVADE 9-Bay Charger with a European-power plug is made specifically to work in Europe.
USB Charging Cable for HUB Mini Base & 2-Port
Power Supply 12V AC/2.0A (F8, UAC-8, TAC-8)
UltraLite Foam Replacement Ear Pad (Bag of 2)
8 Port AC Adapter
HUB AC Adapter
AVN-DIO Large Unit Underdesk Mount
Ultra Replacement "Left" Ear Pad
Ultra Replacement "Right" Ear Pad
ComStar Oval Replacement Ear Pad (Bag of 2)
Print for NTM1, NTM4, including insolating plate
Power Supply 9V DC/0.5A (RT-223, G2nu, G2.1nu)
Print for NTL1 including insolating plate
Plug-in mains unit with country-specific adaptor for stationary receivers and transmitters of evolution wireless G3 series
Power supply for EW-D receiver
Power supply for L 70 charger
The cable eliminates the need for multiple power cables running to each individual receiver; instead, you can run one cable for the entire system.
The Sennheiser 12-5 CW+ Universal Power Supply for EW-D EM Wireless Receiver is a universal power supply used to power EW-D EM wireless receivers.
Stereo Print to NTL1, NTM4, NTM1 (NSTP)
Xtreme Replacement Ear Pad (Left Ear)
Xtreme Replacement Ear Pad (Right Ear)
Professional audio transformer 1:4 with free wires. Applications: mic input step-up
EU power cord for TC Bar M, 1.8m
Power Cord EU for TC Bar S
Professional audio transformer 1:1 with PCB mounting. Print Version
UltraLite Replacement Headband Pad
Professional audio transformer 1:1 with free wires. Applications: general purpose, splitting and XLR inline
Print for NTL1, NTM1, NTM4, including insolating plate
Coupling T23 black 11.5mm
UltraLite Off-Ear Neoprene Pad
Monarch Replacement Ear Pads (Pack of 10)
HUB Replacement Belt Clip
Lanyard for UltraLITE Headset 28" Long
Power clutch T13 black
Connector T23 black 11.5mm
3,5 mm jack to Headphone / Mic adapter. Two year warranty after registration on Datavideo's official website.
Lieferzeit binnen 3 bis 4 Wochen
Plug T12 black
Insulating plate for NTM and NTL transformers