Leather handgrip kit, including a handgrip combi rail bracket (0390-0006) and two short leather handgrips (0390-0004). The handgrip combi rail bracket (0390-0006) can be mounted to any 15 mm LWS, 15 mm studio and 19 mm rail supports.
QUICK HANDLE with ROD BLOC
Canon C200 Remote Extension Handle With Cable
Attaches to the Side Camera Handle (SCH-1) instead of the Adjustable Center Grip Medium (ACG-1). Provides enough space for third PARty on-board recorders of different heights.
The SAB-1 allows users to position accessories towards the rear of the ALEXA Mini in order to optimize balance and bulk. Includes: K2.0012692 1x Side Accessory Bracket SAB-1; K2.0006186 1x Rod mounting bracket RMB-3; K2.66255.0 1x 15 mm Reduction Insert
Top plate required for use of ALEXA Mini LF and Vertical adapter. Features interfaces for CCH-2 handle, MVB-1 and VMB-3 viewfinder brackets and tape hooks. Included in KK.0024136 Vertical Adapter Set for ALEXA Mini LF
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012917 1x Handgrip Extension 240mm; K2.0012921 2x Cable Clip 15mm.
Attaches to the top of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA XT, ALEXA XT M body, ALEXA XT Plus or ALEXA XT Studio camera and provides numerous 3/8"-16 UNC threaded mounting points for accessories. Can be used when the BATG adapter is attached to the top of the camera, but not with the BAT-V adapter or when any on-board...
12" dovetail plate
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
15Mm Cheeseplate V-Mount For C300 Mark Ii
Tiltaing Z CAM E2-S6/F6 Kit B - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing RED Komodo Kit C - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing RED Komodo Kit C - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Weebill S Handheld 3-Axis Gimbal Stabilizer for Cameras
The SHAPE VESA monitor support mounts to industry standard 5/8 baby pins or C-stands and supports monitors with a 100 x 100 or 75 x 75 VESA pattern. This sturdy mount features a Push-Button tilt angle adjustment and a friction locking knob to lock and secure the monitor at the desired angle.
The Manfrotto 320PX Plexiglass Panel is a white translucent plexiglass that mounts with touch fastener tape, and may be tilted/bent upward and locked into place, to any angle up to 90°, for totally seamless backgrounds. It is designed to fit the Manfrotto 320 shooting table frame, but may be suitable for your own shooting table frame
Lieferzeit binnen 4 bis 8 Wochen
The cage wraps around three sides of the camera, leaving the handgrip exposed for accessibility.
Lieferzeit binnen 8 bis 12 Wochen
This Arca-type baseplate mounts onto the included Bridge Plate Dovetail and features dual 15mm rod ports for mounting optional 15mm accessories.
Lieferzeit binnen 8 bis 12 Wochen
Integrate 15mm rod support systems at the correct lens height for your FUJIFILM GFX 100S or X-H2S camera using this LW 15mm Baseplate from Wooden Camera. The quick release baseplate has dual 15mm rod ports that have two locking thumbscrews to tighten or release the system.
Lieferzeit binnen 8 bis 12 Wochen
Simplify using your camera with cine-style accessories with this Wooden Camera Lightweight 15mm Baseplate for the Panasonic LUMIX BGH1 camera.
Lieferzeit binnen 8 bis 12 Wochen
Unified Baseplate Core Unit (No Dovetails)
Lieferzeit binnen 8 bis 12 Wochen
Revolva Pass Through Top Plate (DSMC2)
Lieferzeit binnen 8 bis 12 Wochen
Eyepiece Leveler Telescoping Arm
Lieferzeit binnen 8 bis 12 Wochen
Shoulder Rig v3 Dovetail and Shoulder Pad Assembly
Lieferzeit binnen 8 bis 12 Wochen
Unified BMPCC4K / BMPCC6K Camera Cage (Blackmagic Pocket Cinema Camera 4K / 6K) with Wood Grip
Lieferzeit binnen 8 bis 12 Wochen
Trigger Handle (RED DSMC2)
Lieferzeit binnen 8 bis 12 Wochen
Vertical Grip for Alpha 7RM4
Protect and prep your RED KOMODO camera for accessories using this Full Cage Kit from Vocas. Constructed of aluminum, the kit consists of two top and bottom plates and two side plates.
Black steel base, silver anodised aluminium sections, complete with wheels. 3 sections, 2 risers. 1 levelling leg
Lieferzeit binnen 4 bis 8 Wochen
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012911 1x Handgrip Extension 160mm; K2.0012921 1x Cable Clip 15mm.
The Adapter is allows quick transition between Tripod / Shoulder and DJi Ronin 2 stabilizer for ALEXA Mini and ALEXA, Mini LF with Compact Bridge Plates CBP-1 (19mm studio) and CBP-2 (15mm studio). The CBP Adapter fits to the Ronin 2 "camera base plate"
Arri's Lightweight Bridge support LBS-2 comes with hard-mounted rosettes - offering support for handheld set.
Compatible with MBP-3 - MBP-1 Pro BP - Adapter Plate for Canon C100/300/500 - Adapter Plate for SonyF5/F55 - Adapter Plate for Canon 1DX-1DC - Adapter Plate for RED Epic/Scarlett
The top plate for Sony F5 and F55 cameras is designed to offer multiple mounting interfaces for accessories. An Arri handle can be attached at three different positions to optimize balance - although the original Sony handle remains compatible. With its multiple centered interfaces - the top platecan also be used as a low mode plate for Steadicam shots.
Vacumm Suction Cup With Cheese Plate
Wooden Handle Single Left Arri Rosette
Wooden Handle Single Right Arri Rosette
Canon C500 Mark II Push-Button Viewfinder mMount
The Vocas dedicated Canon EOS C200 cage system gives the camera extra steadiness and stability especially when using heavy set-ups
Canon C70 camera cage
Handgrip kit, including 19mm and 15mm combi bracket (#0390-0006) and two handgrips (#0390-0005)
Elemack Anodized Aluminium Plate Base + European Coupling
The kit includes the LCD support bracket and the Sony 8T to 15mm viewfinder extension bracket.
Vertical Battery Grip X-T4 "Swiss Garantie"
Clamping base 20sz, Opening 80mm, 150 x 82 x 60 mm, on request
Lieferzeit 4 Wochen
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips. Includes: K2.0012913 1x Handgrip Extension 80mm; K2.0012921 1x Cable Clip 15mm.
Pro Set 15mm Reduction Insert. The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods. Includes: K2.66255.0 10x 15mm Reduction Insert
ARRIs Universal Bridge Support UBS-3 offers compatibility with 19 mm studio, 15 mm studio and 15 mm lightweight rods and comes with hard-mounted rosettes with a total weight of only 240g
For using handgrips with rosettes on: K2.66173.0 1x Adapter Plate for Canon EOS C100 /300/500 and/or the Cage System
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
Red Gold Mount Cheese Plate
Red V-Mount Cheese Plate
Eyepiece EVF Extension
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The Zhiyun CRANE-M2S helps you explore more possibilities in filming with its brand new compact design, enhanced compatibility and the newly-added fill light.
Including double 15 mm rail holder at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
Cheese Plate Mitchell Hi-hat
Universal Head 7-12 Feet (210-350 Cm)
Wall Mount for AWHE130-AWHE120 (Black)
Lieferzeit binnen 6 Wochen
Wall Mount for AWHE130-AWHE120 (White)
Lieferzeit binnen 6 Wochen
Universal Bridge Plate Arri And 12" Dovetail Plate Arri Standard
Bended Aluminium Frames (122 x 200 cm)
UVF Mount (Sony FX9, FS7, FS7mkII, Panasonic EVA1, No Clamp)
Lieferzeit binnen 8 bis 12 Wochen
Tiltaing Sony a7siii Kit D - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Sony a7siii Kit D - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Panasonic S5 Kit B - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Panasonic S series Kit B-Tilta Grey
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Panasonic GH Series Kit B - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Pipe Clamp on Paddle
Universal Head 5-10 Feet (15-300 Cm)
4 Axis Push Button Arm 3/8-16
For attaching at the Cage System
Attaches to ALEXA M Bridge Plate Adapters (AMB-1/2)
Welded Aluminium Frames (90 x 90 cm) Pack of 5 pieces
SHAPE touch and go quick release receiver base
Touch and Go Receiver Only (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
Lieferzeit binnen 8 bis 12 Wochen
Mini Touch and Go Receiver Only
Lieferzeit binnen 8 bis 12 Wochen
Micro Touch and Go Receiver Only (Sachtler FSB 10T, 8T, FSB 6T, Touch and Go Plate S)
Lieferzeit binnen 8 bis 12 Wochen
This Wooden Camera Quick Release Top Plate is designed to slide onto your Sony VENICE/VENICE 2's top dovetail mount for seamless, tool-free attachment to expand the mounting points on your rig.
Lieferzeit binnen 8 bis 12 Wochen
15Mm Cheeseplate V-Mount For C100/C300/C500
Made Specifically For The Canon Eos C100 C300 C500 Cameras. Paparazzi Handle Rod Block Included With The Baseplate.
Tilta Float System Post
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The kit includes a full camera cage, a 15mm LWS baseplate, a left-side power handle, a side handle attachment, a USB Type-C run/stop cable, and two 8" long 15m rods to support your Canon C70 camera.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Vertical Battery Grip X-H1 "Swiss Garantie"
36" column studio monitor stands with non-marring decoupling pads, supplied in pairs, weight 5.5kg, 914mm, max. 34.1 kg
LWS - Light Weight Support 15 HD BlackMagic Cinema & Production, with diameter 15 mm rods L. 310 mm with thread for extensions, double rod guidance and clamp
LWS - Light Weight Support 15 HD for Sony EX3, with diameter 15 mm rods L. 310 mm, double rod guidance and clamps.
LWS - Light Weight Support 15 HD JVC GYHM100, with diameter 15 mm rods L. 310 mm, double rod guidance and clamps.
LWS - Light Weight Support 15 HD HPX-250 - assembled for use with Panasonic HPX-250 - with diameter 15 mm rods - L. 310mm - double rod guidance and clamp.
LWS - Light Weight Support 15 HD for DSLR camera with anti-twist block - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamps. Adjustable for larger camera bodies by removing spacers. Shorter M5 x 45 mm screws and Allen wrench are included. (Compatible for Canon EOS 5D - Nikon D800 - Nikon D90 - Panasonic DMC-GH3 - Black Magic Pocket Camera)
LWS - Light Weight Support 15 HD for Sony F3 camera - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamps. Also for combination with Bridgeplate Cine with diameter 19mm rods (e.g. 401-F235 - BP-8).
LWS - LightWeightSupport 15 HD for Nikon D800 camera with anti-twist block - assembled - with diameter 15 mm rods - L. 310 mm - w. thread for extensions - dual rod guide and clamps.
LWS LightWeightSupport 15 HD for Canon EOS C100 - 300,500 camera with diameter 15 mm rods L. 310 mm - w. thread for extensions - dual rod guide and clamps
LWS - Light Weight Support 15 HD Allround - w. diameter 15 mm rods L. 310 mm - double rod guidance and clamp - adjustable for any camera with optical height betw. 26.5 a. 72.5mm (distance betw. lens center and camera bottom). Spacers (pairs) of 1 - 2 - 4 - 8 - 2 x 16 mm - set of screws - table with camera heights and Allen wrench are included.
LWS Light Weight Support for Panasonic DVX-200
The CSP-2 is a very light, flat shoulder pad with a long Visco pad for the ALEXA 35. Its four feet allow the camera to be safely seated on a flat surface when not on the operator's shoulder.
The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer systems products. The 254mm (10) plate will allow most camera featuring 3/8 threads on the base to be safely mounted to ARRI Trinity, ARRI MAXIMA, ARRI SHR-3 and SRH-360. Includes: 2x 3/8" Screws
The shortest of our Bottom Dovetail Plates fits very well on camera carts, car mounts, Steadicam or with any applications when balancing is not necessary, but the interface is welcome to work with an SBP-1 or BP-8/-9.
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips
The handle adapter allows to attach the Panasonic AU-EVA1 handgrip at a handgrip extension. This allows to extend the distance between camera and handle. Using the HGA-3 requires a longer, separately sold LANC cable
The camera mounts into the cage with two bottom screws, and the cage protects your camera while maintaining access to controls and ports on all sides. Accessories can be mounted around the cage using the 1/4"-20 and 3/8"-16 threads as well as threads that feature ARRI-style anti-twist locating holes.
Lieferzeit binnen 8 bis 12 Wochen
This Faceplate Cage from Wooden Camera attaches to your select Sony VENICE Series camera with its existing mounting points to provide places to attach various accessories.
Lieferzeit binnen 8 bis 12 Wochen
Multi Monitor Mounting Bracket W/ Quick Release Mounting Set
ATOMOS SHOGUN INFERNO and FLAME SERIES CAGE
Bmd Video Assist 4K Cage
Cage for Blackmagic Cinema Camera 6k/6k Pro/6k G2 With Top Handle
Add 15mm LWS rods to support the Sony FX6 camera and add accessories with this 15mm Lightweight Baseplate from SHAPE. The aluminum baseplate features removable 15mm rod clamps on the front and back, and it secures your camera to the plate using 1/4"-20 and 3/8"-16 screws.
Sony FX6 Push-Button view finder mount
Sony FX6 camera cage
Professional handgrips side arms (pair)
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Camera Cage for Sony FX6 Advanced Kit - Gold Mount
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Camera Cage for Sony FX6 Advanced Kit - V Mount
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Universal Head 4-8 Feet (120-240 Cm)
Stirrup 5-10 Feet (150-300 Cm)
4 AXIS PUSH BUTTON ARM
The Clamp 2 for RAB-1 offers a strong and reliable connection to the Rear Accessory Bracket RAB-1. The Clamp 2 features a safety lock to prevent the battery plate dismounting unintentionally
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD-2 is available separately to complement Stabilizer plates for CBP 225mm/9in, 355mm/14in and 450mm/18in.
Adjustable monitor bracket compatible with monitors with screen sizes up to 9". The AMM-1 secures monitors via top and bottom standard 1/4"threads. The AMM-1 mounts to 19mm rod, such as the rod for Director's Monitor Support DMS-1
The Rear Accessory Bracket RAB-1 offers lightweight and flexible attachment options for power solutions. Fits ALEXA Mini / Mini LF
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.
PANASONIC GH5 CAGE TOP HANDLE
The top handgrip Pro is completely closed which gives you more safety and security even when wearing gloves. The mounting foot of 82 mm can carry a weight of 40 kg
With integrated level marker and many industry standard 3/8" and 1/4" threaded holes.
Cage with handle, designed for the Alpha 7 series from Sony: Sony A7S II, Sony A7R II and Sony A7 II mirrorless digital 4k camera.
Rhinoceros Advanced Cage Kit for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III 3710
Lieferzeit binnen 4 bis 5 Wochen
Bended Aluminium Frames (122 x 122 cm)
The two-piece plate attaches to the top of the camera using four included screws and provides 1/4"-20 3/8"-16 ARRI-style anti-twist accessory threads for extension arms and handles.
Lieferzeit binnen 8 bis 12 Wochen
This cage piece mounts directly onto the rear right side of the KOMODO-X and provides eight 3/8"-16 and five 1/4"-20 anti-twist threads to add a variety of accessories.
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Canon C70)
Lieferzeit binnen 8 bis 12 Wochen
This Ultra Handle Kit with 3" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your handheld camera rig.
Lieferzeit binnen 8 bis 12 Wochen
Add quick-release mounting functionality to your Sony VENICE Rialto or Rialto 2 camera using this Wooden Camera Arca-Type Baseplate. The baseplate maintains a low center of gravity thanks to its low-profile design
Lieferzeit binnen 8 bis 12 Wochen
This Ultra Handle Kit with 3" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your Sony VENICE series camera rig. Included in the kit is one 3" extension, one 1" extension, and one front connector. Various mounting threads and 3/8"-16 screws secure each part to one another along with the included Allen key.
Lieferzeit binnen 8 bis 12 Wochen
LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height.
Lieferzeit binnen 8 bis 12 Wochen
Unified DSLR Cage (Medium) with Rubber Grip
Lieferzeit binnen 8 bis 12 Wochen
The Fujifilm X-H1 Camera Cage is a quick release, height adjustable cage for the Fujifim's X-H1 DSLR
Lieferzeit binnen 8 bis 12 Wochen
Unified DSLR Cage (Medium) with Rubber Grip
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Sony FX9)
Lieferzeit binnen 8 bis 12 Wochen
UVF LCD Sled
Lieferzeit binnen 8 bis 12 Wochen
Unified DSLR Cage (Medium)
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Sony Venice) is a top cheeseplate for the Sony Venice that contours to the shape of the camera body and leaves the USB port area open
Lieferzeit binnen 8 bis 12 Wochen
Top Handle Kit (RED Komodo, ARCA Swiss)
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Canon C300mkIII, C500mkII)
Lieferzeit binnen 8 bis 12 Wochen
This formfitting full-frame cage kit includes an F570 left-side power handle with run/stop capability, a run/stop cable, an HDMI male-to-female cable, an HDMI cable clamp, an HDMI and R/S cable clamp, a detachable top plate, and an Arca-Swiss quick release bottom plate.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
15mm LWS Baseplate with Shoulder Support for Sony Venice 2
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Paddle Mount: Euro Apapter for 2" Copupler Tube
Paddle Mount: Euro Apapter for 2" Copupler Tube(M12)
Euro Adapter
Universal Head 3-6 Feet (90-180 Cm)
Sony Vertical Grip for Alpha 7M2
The Manfrotto 299B Baby Studio Stand is a smooth running studio performer with low profile base that slips easily into position on the set. It has a Baby (5/8") top stud and free-running wheels with positive locking brakes. The 299B rises to a maximum height of 8.9' (2.7 m), supporting equipment up to 26.4 lb (12 kg)
Lieferzeit binnen 4 bis 8 Wochen
The SHAPE Nucleus Trigger Grips Rod Bloc allows you to attach two Tilta Nucleus-M handgrips and adjust them on the fly with SHAPE's famed push-button technology
The cage protects your camera without blocking access to its functions, and the included top handle allows you to add more accessories and hold the camera for low-angle shots.
Top Plate For Sony Venice With 15mm Lw Front Rod Clamp
This formfitting cage is designed to be used with the Sony FX9, and has Arri rosette and mounting options. It is also made of CNC aluminium.
The Shape Telescopic Support Arm + Rod Block includes a Manfrotto 233B Camera Mount Bracket with a 4" cup that provides a large surface contact area, and a Shape Rod Block.
The Rosette Adapter RA-3 adapts the existing handgrip K4.72172.0 and the HEB interface to the Arri rosette style.
Top Plate (URSA Mini, URSA Mini Pro / 12K)
Lieferzeit binnen 8 bis 12 Wochen
Unified VCT-14 Tripod Plate
Lieferzeit binnen 8 bis 12 Wochen
The ARRI Top Plate for Panasonic AU-EVA1 is a lightweight support featuring numerous accessory threads and a built-in console for 15 mm LWS rods
This lightweight rod adapter offers 15mm LWS standards to the Compact Bridge plates CBP-1 (19mm) and CBP-2 (15mm) baseplates for ALEXA Mini/ Mini LF.
Vertical Camera Bracket
Lieferzeit binnen 8 bis 12 Wochen
The LLS-1 is a multifunctional solution for lenses with a diameter between 39 mm and 153 mm. It offers a 3/8" and a 1/4" interface for lenses with an included lens support pin. Lenses without a pin, such as an Alura Lightweight Zoom, Prime lenses, or still photo lenses can be supported by using the bracket with plastic support rollers.
The Top Plate is attached to the Extension unit with four screws. It offers plenty of interfaces (3/8-16 and 1/4-20 with anti-twist pin holes; RMB-3; CTH-1; CCH-2 and CCH-4; 15mm LWS Rod Console at the back). It includes an optically centered 15mm lightweight rod support with individual rod clamps. An interface at the back offers the usage of ARRI´s 15mm...
ENG STYLE CAMCORDER BASEPLATE
Canon C200 Grip Relocator
50mm Extension piece of Tecnopoint riser
Lieferzeit binnen 6 Wochen
Part 1 Riser Set (female)
Lieferzeit binnen 6 Wochen
Rickshaw hardened steel European Coupling
The bracket connects between the camera's original, detachable LCD monitor and your camera to provide additional stability.
Stirrup 4-8 Feet (120-240 Cm)
Mitchell to Elemack Adapter With Castlenut
Mitchell to Elemack/euro Adapter With Castlenut(M12)
Mitchell Hi-hat 4.5" Height
Blackmagic Ursa Mini Remote Extension Handle
Blackmagic Pocket Cinema 4K Cage with Top handle
Shoulder support for 15mm rails
Spare dovetail plate 295 mm V2
Camera adapter plate that attaches directly under the Arri Alexa 35 allowing our widely available USBP sliding system to be used with this camera.
NATO Lock Ultra Arm (8")
Lieferzeit binnen 8 bis 12 Wochen
The ARRI Handle for RED DSMC2 features an integrated 15 mm LWS rod console for the mounting of accessories. A handy monitor bracket allows the camera monitor to be repositioned on top-mounted 15 mm LWS rods.
Handgrip Extension - long
Canon C200 Push Button View Finder Mount
Canon C200 15Mm Base
Panasonic Au-Eva1 15Mm Base
Self-Locking Air Cushioned Cine Stand, Black, 10.5' (3.2m)
Lieferzeit binnen 4 bis 8 Wochen
The Mini Quick Release Monitor Mount for Magic Arm from SHAPE combines the Mini Delta Monitor Plate with the Mini Quick Release Lock Station.
The Mafrotto 297B Wheeled Stand Base is suitable for mounting light or heavy-weighted fixtures close to the floor or ground. It has a Junior (1-1/8") female receptor for larger fixtures, and a Baby (5/8") stud for smaller fixtures. It folds for easy transport and storage
Lieferzeit binnen 4 bis 8 Wochen
Basic package for Blackmagic Cinema Camera-Tactical Grey
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Basic package for Blackmagic Cinema Camera- Tilta Grey
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Basic kit for Blackmagic Cinema Camera - Black version
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing RED Komodo Kit B - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing RED Komodo Kit B - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Sony FX3 Basic Kit - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Sony FX3 Basic Kit - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Stirrup 3-6 Feet (90-180 Cm)
Canon C500 Mark II 15mm Lightweight Baseplate
This 15mm Pro Rail Support Type R from Vocas can accommodate medium to large-sized cameras thanks to its durable aluminum camera plate and 15mm rods.
The kit includes the Top Handgrip Mini and a top cheese-style plate for the C70. The plate mounts on top of the C70 using a 1/4"-20 screw, and it features a shoe mount, 15mm rod ports, and 1/4"-20 and 3/8"-16 accessory threads.
Equiped for optional double 15 mm rail holder (0350-2010) at the front for alternative viewfinder attachment or lens motors. Allows the original Sony handgrip and viewfinder bracket to be used.
150mm Bowl Adapter
Elemack/euro Female Adapter
The Mini Side Bracket MSB-2 offers support for lens motor in configurations that require lightweight baseplates with no rod support, such as lightweight stabilizer systems or drones.
Canon C Series Grip Relocator
LWS - Light Weight Support 15 HD Sony F5/ F55 w. ? 15 mm rods L. 310 mm, double rod guidance and clamping
19 mm lens support for all lenses. Incl. 4 adapters
For guide pillars RSP, e.g. B. for 5612, 5613. Built-in spirit level. Incl. fastening screws M8x80 and washers, e.g. B. for mounting the base on the floor stand 75H (5618)
Set Leather Handles - retrectable - swiveling and rotatable handles with HIRTH rosettes connection.
Light Weight Support Sony Universal HD + updated version 2018 , Digital ENG, incl. 2 rods ? 15mm, L205mm
Camera Cage with Handle for Panasonic GH5,GH5S consisting of: 700-HANDLE: Handle with 3/8"+1/4" threads, easily detachable. Various positions possible. 700-GH5-CAGE: Cage also with 3/8"+1/4" threads, mounts directly on Sachtler ACE and Manfrotto 501+701 or w. tripod plate on other tripods
Handgrip Extension (pair), for all handles with Hirth (ARRI) rosettes.
Cold Shoe Rail on the Universal QuickFit Accessory Bridge for 15 and 19mm rod diameter . For mounting of devices with hot / cold shoe adaptors, such as MagNum lens remote control and ALADIN MK II Broadcast for UHD TV setup.
Universal 15/19mm Lens Support Bracket with 3 support stands, intercombinable, lenght 14, 27 and 35 mm (1/4" und 3/8" threads), for lenses with knurled terminal screw M6 for lenses with thread M6. With QuickFit device for diameter 15 LWS + 19 mm rods.
LWS - Light Weight Support 15 HD Allround - * special without rods * - double rod guidance and clamp - adjustable for cameras with optical height betw. 26.5 a. 72.5 mm (distance betw. lens center a. camera bottom). Spacers (pairs) of 1 - 2 - 4 - 8 - 2 x 16 mm - set of screws - table with camera heights and Allen wrench are included.
DSW 500 Adaptor - Direct Swing-Away System - swing radius 100mm - adaptor for all MB with 15mm rod supports - e.g. MB 456 - MB 450R2 and 450W
Light Weight Support BTS LDK 100/120/ 6000/7000 incl. 2 allen wrench (for mounting on Quick-lock Plate) - complete with 2 rods dia. 15mm length 205mm
Light Weight Support for JVC GY-HM700/750 complete with 2 rods dia. 15mm - length 160mm (compatible to QuickLock tripod plate)
Universal 15/19mm Lens Support Bracket with 3 support stands - intercombinable - lenght 14 - 27 and 35 mm (1/4 inches und 3/8 inches threads) - for lenses with knurled terminal screw M5 like Canon HJ40x10 and HJ40x14 (thread M5). With QuickFit device for diameter 15 LWS + 19 mm rods.
Universal 15 + 19mm Lens Support Bracket with 3 support stands - intercombinable - lenght 14 - 27 and 35 mm - for all lenses with 1/4 inches and 3/8 inches threads. With QuickFit device for diameter 15 LWS + 19 mm rods.
LWS Light weight support for DSLR cameras Canon EOS 5D MKII - 7D - 550D & Nikon D90 - D60 - D7000 and others : cpl. with twist stopper + adjustable rods dia 15mm l. 205mm (401-400+401-421P)
MultiPad 15 Adjustable ShoulderPad complete with MultiPad 15 Straight and Side Lock for use with diameter 15 mm rods. Pad mounts under the camera - behind or sidewards for cameras with viewfinder in the body.
Light Weight Support Panasonic Universal (new shorter Platte, also for AG-HPX600, AJ-PX5000), complete with 2 rods (dia. 15mm, L. 205mm) single-hand clamp, 4 countersunk screws
The durable aluminum support bracket mounts onto the side of the camera LCD with a clamping design, using the display's side rod port to secure it.
Welded Aluminium Frames (60 x 60 cm) Pack of 5 pieces
Sony FX3 Cage
Assistant's Front Box Mount for Fluid Head
Mount accessories such as handles or extensions onto either side of your ARRI ALEXA 35 cinema camera with this Side Rail System from Wooden Camera.
Lieferzeit binnen 8 bis 12 Wochen
Wireless Control Dual Handgrip for DJI RS Series 3954
Lieferzeit binnen 4 bis 5 Wochen
The All-in-One Video Kit Ultra from SmallRig is a professional solution for smartphone vlogging, live streaming, and more.
Lieferzeit binnen 4 bis 5 Wochen
Tiltaing Advanced Side Wooden Handle Type X - Black (One Pair)
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Advanced Side Wooden Handle Type XI - Black (One Pair)
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Advanced Side Wooden Handle Type IX - Black (One Pair)
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The Pro rail support 15 mm type P is a compact support which provides compact and medium cameras with front and even rear bars at the same time
The Pro Rod Support 15mm Type Q from Vocas provides 15mm LWS support for select DSLR and mirrorless cameras. This versatile baseplate system is height adjustable and includes a pair of 9.2" 15mm rods.
NATO Lock Ultra Arm (3")
Lieferzeit binnen 8 bis 12 Wochen
Battery Swing Bracket Only (for D-Box Plus)
Lieferzeit binnen 8 bis 12 Wochen
The Camera Side Bracket CSB-1R allows mounting of accessories to the right side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes. It can be extended with the Camera Side Bracket CSB-1R Extension (K2.0034189).
The Camera Side Bracket CSB-1L allows mounting of accessories to the left side of the ALEXA 35 without obstructing the user buttons. It features an ARRI rosette for hand grips and multiple 1/4-20, 3/8-16 and M4 mounting holes.
The Vertical Top Plate attaches to the ALEXA 35's left side and acts as a top plate to support the Lightweight Camera Handle LCH-1.
The RAB-3 is a rear accessory bracket for ALEXA Mini LF optimized for the new utility base BUD-3. Note a classic RAB-1 for ALEXA Mini LF can be turned in to a RAB-3 by removing the lower end of the RAB-1 in order to connect direct to the RAB-1.
Panasonic AU-EVA1, Sony FS7, FS5 V-Mount Cheese Plate
LiteMount, Extra Large
This kit includes an adjustable handgrip extender and a body rosette adapter for the FX6, and they are designed to position your original FX6 handgrip at a more comfortable distance for handheld operation.
Ultra QR Articulating Monitor Mount (Baby Pin, C-Stand)
Lieferzeit binnen 4 bis 9 Wochen
Lockable Drawer for the Platform of Image Mobile Station
Wooden Camera - Safety Dovetail (12 inches)
Lieferzeit binnen 8 bis 12 Wochen
Chapman hardened steel European Coupling
Camera cage for RED Komodo
Rack Mounting Bracket for PVM-X2400
Right Side Wooden Handle with R/S Button for Sony A7/A9 Series
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Right Side Wooden Handle with R/S Button for ARRI Alexa mini
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Right Side Wooden Handle with R/S Button for Panasonic GH Series
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Right Side Wooden Handle with R/S Button for RED DSMC2
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Right Side Wooden Handle with R/S Button for Sony F5/F55
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Lens Support Bracket for Fujinon ENG zoom lenses for mounting on LWS ? 15mm rods
Bowl 150 mm
Could be mounted on front and back of Adapter Plate for Epic/Scarlet or can beused for the Cage System. This rod console also can beused for several adapterplates.
The ARS-3 Cube Set combine: K2.0033852 1x Accessory Rail Cube ARC-1; K2.0034278 1x Accessory Rail Small ARS-3
The bracket for Zacuto Gratical EVF electronic viewfinder provides a design-specific interface to the traditional ARRI viewfinder support.
PANASONIC GH5 CAGE
The SHAPE CP33 Cheese Plate with Anton Bauer Plate is a 15mm rod-mount cheese plate with an Anton Bauer Gold Mount battery plate screwed onto one side.
The SHAPE CP33 Cheese Plate with IDX Plate is a 15mm rod-mount cheese plate with an IDX V-Mount battery plate screwed onto one side.
SONY PXW-FS7M2 REMOTE EXTENSION HANDLE KIT
REVOLT BRIDGEPLATE 15MM LW KIT
Panasonic AU-EVA1, Sony FS7, FS5 Gold Mount Cheese Plate
Leather handgrip kit for Sony Alpha A7 with 1 handgrip
DSW 400 - Direct Swing-Away-System - swing radius 50mm - bracket with hinge to clamp on Light Weight Support with 15mm rods type 401-4xx - incl. 2 pcs. knurled nut M3 (E1744010) and 2 washers (6x12xT0.5) - mounting on large SunShades e.g 411-50
DSW 400 - Direct Swing-Away-System - swing radius 50mm - bracket with hinge to clamp on LWS 15mm rods type 401-4xx - incl. 2 countersunk flat head screws M3x8 for mounting on MB450/CMB
LWS Light weight support for Panasonic AG-3DA1 - HVX-200 - HPX-250/160/130 - Canon XF-305 / XF-300. Sony PMW-F3 - complete (401-400 + 401-415P) (For Sony F3 please choose 401-415HD)
LWS Light weight support for Sony HDR-FX1/ HVR-Z1/PMW-EX1/HVR-Z7 complete (401-400 + 401-417P)
LWS Light weight support for Sony HXR-NX5 complete (401-400A + 401-424P)
LWS Light weight support for Panasonic AG-AF100 + HDC-Z10000EZ complete (401-400 + 401-427P)
LWS Light weight support for sinaCAM with B4 or C lens mount - complete (401-400 + 401-428P)
Two-Part Top Plate Kit for Sony FS5 Camera
TELESCOPIC SUPPORT ARM RODBLOC WITH QUICK PLATE
LED PWR MODULE QUAD
Lieferzeiten von 4 bis 6 Wochen
Tiltaing RED Komodo Kit A - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing RED Komodo Kit A - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Control your Nucleus-Nano motor without taking your hand off this Tiltaing Left-Side Advanced Focus Handle Type V from Tilta. Designed in a black finish for Tiltaing camera cages, the handle allows you to control focus via a built-in fingerwheel, and it features a button for triggering recording on/off over an optional Tilta R/S cable connection to...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Control your Nucleus-Nano motor without taking your hand off this Tiltaing Right-Side Advanced Focus Handle Type V from Tilta. Designed with a tactical gray finish for Tiltaing camera cages, the handle allows you to control focus via a built-in fingerwheel, and it features a button for triggering recording on/off over an optional Tilta R/S cable...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Control your Nucleus-Nano motor without taking your hand off this Tiltaing Right-Side Advanced Focus Handle Type V from Tilta. Designed with a black finish for Tiltaing camera cages, the handle allows you to control focus via a built-in fingerwheel, and it features a button for triggering recording on/off over an optional Tilta R/S cable connection to...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Control your Nucleus-Nano motor without taking your hand off this Tiltaing Right-Side Advanced Focus Handle Type V from Tilta. Designed with a Tilta gray finish for Tiltaing camera cages, the handle allows you to control focus via a built-in fingerwheel, and it features a button for triggering recording on/off over an optional Tilta R/S cable connection...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Wooden Camera - NATO Handle Kit (Leather, 70mm)
NATO Handle Kit (Plus, 70mm)
NATO Handle Kit (Plus, 100mm)
Crossbar v3 (Pivoting ARRI Rosettes)
Lieferzeit binnen 8 bis 12 Wochen
This durable Arca-type plate features 17 each 1/4"-20 and 3/8"-16 threads that allow the fine balancing of your ALEXA 35 when mounted on a Steadicam or gimbal device.
Lieferzeit binnen 8 bis 12 Wochen
Mount your professional production display weighing up to 45 lb onto a C-stand or other mount with a 5/8" Baby pin using this Ultra Quick Release Articulating Monitor Mount from Wooden Camera.
Lieferzeit binnen 8 bis 12 Wochen
Set of Rosetts for Broadcast Sony/ULB-4. Includes: K2.47639.0 2x Rosette for Broadcast Plate ULB-4
Wooden Camera - Rosette Arm
Lieferzeit binnen 8 bis 12 Wochen
Part 1 Riser Set (male)
Lieferzeit binnen 6 Wochen
NATO Handle Plus V2 Kit (NATO ARRI 70mm Rail, 1.67" Screw Channel).
Lieferzeit binnen 8 bis 12 Wochen
Shoulder Rig v3 Replacement Dovetail
Lieferzeit binnen 8 bis 12 Wochen
Wooden Camera - 15mm Platform
Lieferzeit binnen 8 bis 12 Wochen
Wooden Camera - UVF v2 Sled
Lieferzeit binnen 8 bis 12 Wochen
The tactical gray Advanced Kit for BMPCC 6K Pro from Tilta features a protective full cage and a 15mm LWS baseplate system with a pair of 12" rods for mounting accessories.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The black Basic Kit for BMPCC 6K Pro from Tilta features a protective full cage and a 15mm LWS rod bracket.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The cage is designed for the Alpha 7 series from Sony: Sony A7S II, Sony A7R II and Sony A7 II mirrorless digital 4k camera.
The BLOC 15 Arri Rosette Adapter for 15mm LWS and Studio-Spaced Rods from SHAPE provides a left hand and a right hand Arri rosette for the addition of hand grips and other accessories to a 15mm rod system.
The SHAPE Adjustable Rod Bloc for 15 to 19mm Rods is designed to fit HAND10 handles from SHAPE (sold separately).
Separate tophandle grip low
Panasonic Au-Eva1 Push-Button view finder mount
Single Handle with ARRI Rosette
Sony A7R3 Cage
Lens Support For 15 mm Studio Bridge Plate
Lens Support For 19 mm Studio Bridge Plate
SHAPE cage for Atomos Shogun 7 monitor
Sony FX9 remote extension kit
Weight-optimized side bracket to increases stability and protects the camera.
This ARRI Side Bracket is for the right side of your Sony BURANO.
Compatible with the Top Plate for Sony Venice 1/2 and Plate for Sony Venice 1/2. Not compatible with Top Plate for Sony Venice and Plate for Sony Venice. The side bracket has been adapted in order to fit the geometry and controls of the camera. It offers 3/8"-16, 1/4-20, and M4 interfaces to fit with RMB-3, RMB-8, and RA-6.
Compatible with Sony Venice 1/2. The Plate comes with two integrated 15mm lightweight supports (at the front and the back) and is compatible with the BPA-5 (K2.0017138) and the BSA-1 (K2.0043749). This plate offers a pair of M4 threads on each side to attach the side brackets left and right.
The BGA-2 adapter comes with a ARRI Rosette and offers the possibility to securelyattach common bicycle grips with a standard inner diameter of 22 mm/ 0.87" and alength of up to 136 mm. This allows you to choose the material and ergometry of the handle according to your own requirements. A counter screw at the rear end prevents the bicycle handle from...
This ARRI Side Bracket is for the left side of your Sony BURANO.
The side bracket has been adapted to the geometry and controls of the camera. It offers additional stability, additional 3/8" interfaces and a RA-6 interface.
Euro Adapter Bridge
Attaches to the ALEXA Center Camera Handle(CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
The Rod Mounting Bracket RMB-6 expands camera set-ups opportunities by offering strong support to rod-mounted camera accessories such as lens motors, image transmitters or ultrasonic distance devices.
Half Ball Adapter (100mm)
Single rod bracket for 19mm rods (15mm rods with supplied insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket. Includes: K2.0013007 1x Rod Mounting Bracket RMB-4; K2.66255.0 1x 15 mm Reduction Insert
The CCH-4 is a completely closed top handle and is compatible to most of the ARRI PCA top plates. Numerous of interfaces (1/4-20; 3/8-16; M4) for additional accessories (e.g. RMB-3) are integrated
2 AXIS PUSH BUTTON ARM 15MM ROD BLOC
Atomos Monitor Cage & Support
Ball Head Sold Separately
Lieferzeit binnen 4 bis 6 Wochen
A versatile accessory to expand the range of shooting situations
Tiltaing Canon C70 Handheld Kit - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Dual Channel Wireless Lens Control Handle for Advanced Ring Grip
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Power your Nucleus Nano lens motor and add start /stop control for select cameras with the type-IV Tiltaing Left-Side Advanced Focus Handle for F570 Battery from Tilta. This black handgrip features two threaded mounting holes that allow you to choose from a variety of attachment options for mounting on your camera cage or baseplate (attachment is not...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Power your Nucleus Nano lens motor and add start/stop control for select cameras with the type-IV Right-Side Advanced Focus Handle with Run/Stop for F570 Battery from Tilta. This handgrip with a tactical gray finish allows you to connect to an optional Nucleus Nano motor to control focus via the built-in finger wheel.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Power your Nucleus Nano lens motor and add start/stop control for select cameras with the type-IV Right-Side Advanced Focus Handle with Run/Stop for F570 Battery from Tilta. This handgrip with a black finish allows you to connect to an optional Nucleus Nano motor to control focus via the built-in finger wheel.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Power your Nucleus Nano lens motor and add start/stop control for select cameras with the type-IV Right-Side Advanced Focus Handle with Run/Stop for F570 Battery from Tilta. This handgrip with a Tilta gray finish allows you to connect to an optional Nucleus Nano motor to control focus via the built-in finger wheel.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Add stability and handheld control to your camera setup and power your Nucleus Nano motor via an 8V USB Type-C output port with this Right-Side Advanced Focus Handle Type VI for F570 Battery from Tilta.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Add stability and handheld control to your camera setup and power your Nucleus Nano motor via an 8V USB Type-C output port with this Left-Side Advanced Focus Handle for F570 Battery from Tilta.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Add stability and handheld control to your camera setup and power your Nucleus Nano motor via an 8V USB Type-C output port with this Right-Side Advanced Focus Handle for F570 Battery from Tilta. This handgrip in a black finish features two threaded mounting holes that allow you to choose from a variety of attachment options for mounting on your camera...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Add stability and handheld control to your camera setup and power your Nucleus Nano motor via an 8V USB Type-C output port with this Left-Side Advanced Focus Handle for F570 Battery from Tilta.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Bracket for Dismantable Frames Pack of 2 pieces
This adapter kit includes the Front Rod Bracket and Rear Adapter Plate and mounts onto the separately available Wooden Camera Front Top Plate assembly for ALEXA 35.
Lieferzeit binnen 8 bis 12 Wochen
SHAPE Lightweight Arri Standard 12" Dovetail Plate
This Monitor Cage from SHAPE is designed to provide additional protection for the Atomos Shinobi 7" on-camera monitor. The cage mounts to the monitor at the top and bottom with two 1/4"-20 screws. Across all sides, the cage is designed with multiple 1/4"-20 and 3/8"-16 threads with ARRI-style anti-twist divots for solid mounting options.
Remote Extension Handle For Sony Fs7.
Smooth 5 Combo
Tiltaing Right Side Advanced Focus Handle (F570 Battery) Type II - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Right Side Advanced Focus Handle (F570 Battery) Type II - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Right Side Advanced Focus Handle (F570 Battery) Type VII - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Right Side Advanced Focus Handle (F570 Battery) Type VII - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Left cage side for the Canon EOS C200 cage kit (0600-0050). The left cage side provides a standard rosette for mounting a handgrip (0390-0104) and also provides additional mounting points for ¼ and 3/8accessories
. This Top Handle provides 1/4"-20 and 3/8"-16 accessory threads, two cold shoes, and a single 15mm rod clamp for attaching a separate viewfinder adapter.
The kit includes a mini compact top handle, two "dogbone"-style 15mm brackets, and a 15mm rod that measures 6.7" in length.
Used in conjunction with the Zhiyun MasterEye Visual Controller VC100 for footage monitoring control, motion sensor control and high-quality screen recording on the Zhiyun Weebill 2 3-axis stabiliser.
Attaches to the ALEXA M and ALEXA XT Mhead or Top Adapter Plate for Sony F-5/F-55 and provides numerous 3/8-16 UNC threaded mounting points for accessory mounting.
This bracket is designed to optimise handheld camera operating when using a compact baseplate such as the ALEXA Mini Adapter Plate MAP-2. For use with bridge plate adapter BPA-4 and most standard 15 mm LWS aseplates for third party cameras, the original CSP-1 rod bracket is required.
Pro Cine Set for Canon C300 MkII. Includes: K2.0006864 1x Cine Plate for C300 MkII; K2.66252.0 1x Support Rods 340mm/9.4in, diameter15mm; K2.0006807 1x Shoulder Pad CSP-1; K2.0006859 1x Top Plate C300 MkIIK2.73002.0 1x Center Camera Handle CCH-2; K2.54077.0 1x 3/8in Accessory Adapter, 18, 65mm square.
Converts OConnor Platform rosettes to other mounting standards for accessory mounting (60 tooth ARRI style rosette and 1/4-20 and 3/8-16 threads)
The Side Bracket Left has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch and RMB-3. It is compatible with the rosette adapters RA-6.
The Side Bracket Right has been adapted to the geometry and controls of the camera. It offers additional stability and interfaces such as 3/8 inch, 1/4 inch, RMB-3 and for the Canon Microphone bracket. It is compatible with the rosette adapters RA-6.
Viewfinder Bracket for Sony Viewfinder DVF-EL200 (Venice). It is compatible with ARRI's viewfinder mounting bracket MVB-1.
The Bracket attaches the AU-EVA1 Monitor via 15mm LWS rods and a monitor mount
The view?nder bracket for DSMC2 RED EVF (OLED) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
The view?nder bracket for BOMB EVF (LCOS) allows the view?nder to be attached to a camera via a classic ARRI viewfinder mount, such as the Mini Viewfinder Bracket MVB-1
The Viewfinder Bracket for VariCam is attached to the camera viewfinder in place of the original quick release mechanism. This allows compatibility between the VariCam electronic viewfinder and classic ARRI mounts such as the Mini Viewfinder Bracket MVB-1. Compatible with VariCam LT & VariCam 35/HS
This bracket connects the Canon Monitor Unit to thetraditional ARRI viewfinder mount, in order to benefit from the same ease of repositioning as a traditional electronic viewfinder.
Attaches via 3/8 UNC thread with two locating pins for stability. For use with Arri 18,65mm shoe-mounted accessories.With 435 - attaches to camera carrying handle - the handle must have locating pin holes. Not for 16SR3 or 535.
Camera Cage for PANASONIC LUMIX GH6
Cage for CANON R5C/R5/R6
LWS Light weight support for JVC GY-HM100 E complete (401-400 + 401-423P)
Use the Adjustable Handgrip Extender for Sony FX6 from Vocas to position your original FX6 handgrip at a more comfortable distance for handheld operating
Articulated arm matt, black, with mechanical central clamping.
Lieferzeit 4 Wochen
Use the four 1/4" bolts that come in the package to attach your Canon RF mount to your optional LPL or PL adapters.
Camera Docking Bracket
150mm Bowl Hi-hat 5.75" Height
Camera Cage for Panasonic GH5,GH5S with 3/8"+1/4" threads, mounts directly on Sachtler ACE and Manfrotto 501+701 or w. tripod plate on other tripods. For combination with 700-HANDLE and 700-SUPPORT
Quick Release Sleeper Box (10 pieces)
Bended Aluminium Frames (60 x 60 cm)
Polystyrene plate supports
Offers protection and the possibility to attach accessories
Baseplate for Sony FS5 Camera
Atomos Monitor Cage & Support
Blackmagic Pocket Camera Battery Grip
The PVMK-RX18 is a rack-mounting bracket specifically designed for mounting the PVM-X1800 high grade picture monitor directly on a 19-inch EIA standard rack.
Camera Cage for Sony FX3/FX30 V2 Lightweight Kit - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The kit consists of a top bracket and top handle that mount using included screws onto the top of the separately available side plate kit.
Support a heavy lens while using an LPL lens adapter using this 15mm Rod Clamp for LPL Adapters from Vocas. The aluminum rod clamp fits around your Vocas LPL lens adapter and the standard 15mm rod clamp attaches to separately available top-mounted rods.
Tilta Nucleus-m Monitor Mount and Doucking Bracket
Arri Wcu-4 Monitor Mount and Douking Bracket
Mitchell Mount With 2" Coupler Collar Castle & Nut
Protect the camera body, easy to install the side handle, magic arm, and other accessories for professional creation. Top handle is easy to disassemble, convenient for low-angle shooting, support front and rear adjustment, and allows full access to the camera LCD screen. Monitor mount supports 180° tilting and 360° panning, which is convenient for monitoring
Lieferzeit binnen 4 bis 5 Wochen
MultiPad 15 Straight - for mounting the pad behind the camera and reversed under the camera. With the rods in lower position a tripod plate can remain.
Adaptor 15mm to Bridgeplate with diameter 19mm rods - height and side adjustable (for use with Mattebox)
LWS - Light Weight Support 15 HD for DSLR camera with anti-twist block - WITHOUT RODS - double rod guidance and clamps. Adjustable for larger camera bodies by removing spacers. Shorter M5 x 45 mm screwsand Allen wrench are included. (Compatible for Canon EOS 5D - Nikon D800 - Nikon D90 - Panasonic DMC-GH3 - Black Magic Pocket Camera)
Light weight support Sony universal without rods
Mounting plate (with adjustable angle) for battery holder at diameter 15 mm rods - universal adapter plate with holes and threads for Anton/Bauer Gold Mount - IDX V-Plate and PAG-Lok battery mounts - Sony recorder for FS-700
Universal Rod Support with QuickFit, for 15 + 19mm rods on bridge plates. Includes 22 mm stud which supports long rods on the dove-tail-plate.
LWS - Light Weight Support 15 HD Sony F5/ F55 without rods, double rod guidance and clamping
Rod diameter 19mm x 720mm length for Bridge Plate
The monitor bracket for the Canon C200 LCD replaces the original bracket from Canon. The ARRI PCA monitor bracket is an improved bracket to fit with viewfinder mounting bracket MVB-1
ARS-2 Cube Set combines: K2.0033852 1x Accessory Rail Cube ARC-1; K2.0034009 1x Accessory Rail Small ARS-2
The BAP-2A is a side mounted battery plate offering compatibility to the Compact Bridge Plates CBP-1 and CBP-2. The BAP-2A features mounting interfaces to common battery plates, including ARRI Power Splitting Box and Bebob AMICRO and VMICRO
The MSB-3 is a side bracket designed around the on-board recorder of the ALEXA Mini LF and the new viewfinder connector (Camera left).
The Vertical Format Adapters allow the ALEXA Mini/Mini LF to be used with the sensor vertical, 9/16 format. All ARRI baseplates for ALEXA Mini/ Mini LF can be used in that configuration, including the Compact Bridge Plate CBP-1 and CBP-2.
Single rod bracket for 19mm rods (15mm rods with optional insert) mounting to AMIRA body (top/right). Optimized for camera stabilizer systems and lens motors. Compatible with original AMIRA handle and viewfinder bracket
The Side Accessory Bracket fits to the Mini Adapter plates MAP-1 and MAP-2, as well as the Broadcast Plate for ALEXA Mini and Compact Bridge Plate CBP-1. The SAB-1 provides standard ARRI 3/8 and ? accessories interfaces, as well as attachment points for the Rod Mounting Bracket RMB-3 and Mini Side Brackets MSB-1
The Cage Top Handle CTH-1 is designed to fit onany single 3/8-16 interface found on the Arri Cage System. Like the ALEXA handle - the CTH-1 offers numerous mounting points in the industry standard 3/8-16 and 1/4-20 thread sizes. The Handle is seamlessly compatible with all three sizes of Arri Handle Extension Brackets HEB-1 - HEB-2and HEB-3.
Mini Hydro Kit
Lieferzeit binnen 4 bis 8 Wochen
Cage side bracked for accessory interfaces featuring sturdy Arri rosettes and 1/4-20" and 3/8-16" mounting points. Requires MAP-1 or MAP-2 mounted on top and on bottom of the camera body.
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
With the UAP-1 the camera can be quickly moved froma traditional Arri cine-style bridge plate (including BP-3 - 5 - 8 or 9) to a Steadicam dove tail plate. It attaches to the front and back foot of ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA M body - ALEXA XT - ALEXA XT M body or ALEXA XT Plus with a tight and secure fit.
Attaches to the Center Camera Handle (CCH-1) or any 3/8-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1) - the tape hook is excatly in the sensor plane. Includes 3x 3/8-16 UNC threaded mounting points.
Canon C100 C300 C500 Bracket. Unique Design To Fit Our Quick Handle System
Zhiyun Smooth 5S Combo is a Gimbal that will give you fantastic functions. The gimbal provides great image stabilization for even large smartphones. In the fold-out structure you will also find a 300 lumen LED lamp. A durable battery will provide working time for up to 25 hours.
Smooth 5S Combo Grey
The cage protects your camera without blocking access to the hot shoe or any of your camera's features, functions, ports, or compartments - you can even leave your strap hooks on.
15mm lightweight baseplate for RED WEAPON
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Vertical Battery Grip X-T3 "Swiss Garantie"
Camera Cage for Kinefinity MAVO Edge 6K Basic Kit - Tactical Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Power your camera and control its run and stop function with this black Left-Side Power Handle with Run/Stop Type VIII from Tilta. This next-generation handle features an internal, 50Wh rechargeable battery that delivers a 60W PD output to select cameras that support the PD protocol and provides up to 170% longer runtimes than conventional internal camera...
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Sony Venice Rear Extension for Top Handle (90 Degree Attachment + Straight Wooden Handle )
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Secure a cheese plate-style handgrip to the top of your RED V-RAPTOR camera cage via four built-in 1/4"-20 screws with the Tilta Top Handle to add more mounting options to your rig. Multiple 1/4"-20 and 3/8"-16 threads on the handle allow you to mount articulating arms and secondary monitors.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Right Side Advanced Focus Handle (F570 Battery) -Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Left Side Advanced Focus Handle (F570 Battery) - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Left Side Advanced Focus Handle (F570 Battery) - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Panasonic BGH1 Kit A - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Panasonic BGH1 Kit B - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing Z CAM E2-S6/F6 Kit A - Tilta Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
EVF holder kit for ESR-T01-A cage including rod
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Mitchell Adapter
URSA Broadcast ENG Kit
H-cheese plate for top bars Sony PXW-FS7 / FS7 II
Our USBP sliding systems allows quick balancing of the camera while at the same time allowing a rapid changes between gimbel-, 15 mm- and 19mm setups.
C-cage for the Blackmagic Design Pocket 4K /6K camera, consisting of a bottom, side and top part. An angled HDMI connector and an HDMI protector is included.
HU-11 Hot Shoe Unit
Lieferzeit binnen 6 bis 8 Wochen
Use the Shoulder Pad Pro from SmallRig to quickly switch between handholding your cinema camera and mounting it on a separately available VCT-14 tripod adapter plate.
Lieferzeit binnen 4 bis 5 Wochen
Rhinoceros Basic Cage Kit for Sony a7R V, a7 IV & a7S III
Lieferzeit binnen 4 bis 5 Wochen
SmallRig Retro Handheld Cage Kit for FUJIFILM X-T5 3872 is designed to facilitate low-angle shooting, protect the camera, and provide accessory mounting points. The kit includes a cage, a top handle and an HDMI & USB-C cable clamp, and a hot shoe cover.
Lieferzeit binnen 4 bis 5 Wochen
SmallRig Shoulder Rig Handle Kit 2002 attaches 15mm rods for shoulder-mount shooting. The shoulder rig handle kit comes with independent anti-slip handles utilizing SmallRig rosettes.
Lieferzeit binnen 4 bis 5 Wochen
One pair diameter 15 mm - stainless steel.
One pair diameter 19 mm - stainless steel.
The clamp is part of the Wooden Camera EVF System and mounts onto an accessory rail or the EVF Swivel Arm NATO rail and allows you to slide and swivel the EVF when it's mounted onto an Accessory Rail with the EVF Plate.
Lieferzeit binnen 8 bis 12 Wochen
Eyepiece Leveling Bracket for heads
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4"-20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using...
The bracket connects between the monitor and your camera after removing the detachable LCD monitor, and the bracket angle can be adjusted using the two locking levers.
SHAPE Paparazzi with Bloc. Including: Paparazzi I Handle; Rod Block for Paparazzi.
Canon C100 C300 C500 15Mm Base
Director's Cage for TVLogic F-7H & F-7H Mark II. Includes Mounting Bracket, Sunhood & Perfect Grip Handles with ARRI-Style Rosettes (2799.0319)
Cstand for Mounting your Monitor
Lieferzeit binnen 4 bis 9 Wochen
The plate mounts onto the camera using the Wooden Camera Top Plate, Ultra Handle System, or Side Rails, and it provides four adjustable accessory rails to mount and adjust the position of the viewfinder.
Lieferzeit binnen 8 bis 12 Wochen
Adjust and swivel your Sony BURANO EVF with this Universal EVF Accessory Rail Swivel Clamp from Wooden Camera.
Lieferzeit binnen 8 bis 12 Wochen
Compatible with all three side brackets for the Sony BURANO
Polystyrene plate supports
Canon C70 15 mm base
Sony FX6 Side Handle Adaptor to ARRI Rosette
SmallRig Advanced Cage Kit for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III 3669B is designed to reduce armload and increase stability during handheld shooting while offering a wide range of accessory mounts. It includes a cage, an HDMI cable clamp, a top handle, and a side handle.
Lieferzeit binnen 4 bis 5 Wochen
An extension that attaches between the camera body and the handgrip to move the handgrip further away from the camera body. (measurement from end to end: 10 mm)
Attaches with velcro to the shoulder arch at the bottom of the ALEXA - ALEXA Plus - ALEXA Plus 4:3 - ALEXA Studio - ALEXA XT - ALEXA XT M Body - ALEXA XT Plus or ALEXA XT Studio.
This adapter mounts most Transvideo monitors to a 19mm rods such as the rod for Director's Monitor Support DMS-1
This adapter mounts most SmallHD monitors to 19mm rods, such as the rod for Director's Monitor Support DMS-1
Allows the viewfinder MVF-1 to be rotated 90° on ist optical axis, in order to frame footage shot vertically.
The ARS-1 Cube Set combines: K2.0033852 1x Accessory Rail Cube ARC-1; K2.0016751 1x Accessory Rail Small ARS-1
Bowl 100 mm
The plate mounts onto the camera using the Wooden Camera Top Plate, Ultra Handle System, or Side Rails, and it provides four adjustable accessory rails to mount and adjust the position of the viewfinder.
Lieferzeit binnen 8 bis 12 Wochen
Wooden Handle Grip Replacement For Rubber Handle Clamp - Left
Wooden Handle Grip Replacement For Rubber Handle Clamp - Right
SONY FS7M2 REMOTE EXTENTION HANDLE
This separate top handgrip provides the camera with a comfortable lower top handgrip
This separate top handgrip provides the camera with a comfortable top handgrip
Movcam Sliding Dovetail Plate for KineKit
The fixed Kinefinity KineMOUNT attaches to the camera body by means of 4 screws. It lets you connect to a numerous amount of lens mounts including PL, EF and E mounts.
Complete Mitchell Threaded & Castle Nut
6" Suction Cup With Swivel Couler for 2" Tube
100mm Bowl Hi-hat 5.75" Height
15mm x 3.5in Cube Bar
Telescopic support arm
Use the black Basic Cage Kit for Canon R6 Mark II from Tilta to protect and add accessories to your R6 Mark II mirrorless camera. This kit includes a formfitting Full Camera Cage, a Compact NATO Top Handle, a detachable Arca-type LWS Baseplate Adapter II, and a 15mm LWS Baseplate II.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Use the titanium gray Basic Cage Kit for Canon R6 Mark II from Tilta to protect and add accessories to your R6 Mark II mirrorless camera. This kit includes a formfitting Full Camera Cage, a Compact NATO Top Handle, a detachable Arca-type LWS Baseplate Adapter II, and a 15mm LWS Baseplate II.
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tilta Panasonic S5 II/IIX Basic Kit - Black
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tilta Panasonic S5 II/IIX Basic Kit - Titanium Gray
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Incorporate additional accessories and mounting points into your Sony FX3 or FX30 setup using this Wooden Camera Half Cage. The half cage features an L-shaped design with an Arca-type mounting plate at the bottom for easy transitioning from tripod-mounted to handheld configurations. Two 3/8"-16 and two 1/4"-20 threads on the cage offer places to mount...
Lieferzeit binnen 8 bis 12 Wochen
These durable aluminum plates feature 3/8"-16 and 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Lieferzeit binnen 8 bis 12 Wochen
Create a handle that best suits your Sony VENICE series camera rig using this 5" Ultra Handle Extension from Wooden Camera thanks to its modular design.
Lieferzeit binnen 8 bis 12 Wochen
Create a handle that best suits your Sony VENICE series camera rig using this Ultra Handle Right-Angle Extension from Wooden Camera thanks to its modular design.
Lieferzeit binnen 8 bis 12 Wochen
Top Handle Only (RED Komodo, ARCA Swiss)
Lieferzeit binnen 8 bis 12 Wochen
UVF Knuckle Assembly
Lieferzeit binnen 8 bis 12 Wochen
Monitor Hinge Kit (RED Komodo, ARCA Swiss)
Lieferzeit binnen 8 bis 12 Wochen
WC Pro Gold Mount (3x D-Tap)
Lieferzeit binnen 8 bis 12 Wochen
Unified DSLR 15mm Baseplate
Lieferzeit binnen 8 bis 12 Wochen
The Short Pass-Through Top Plate for RED DSMC2 from Wooden Camera attaches to the top of the camera and provides 1/4"-20 threaded holes with RED spacing.
Lieferzeit binnen 8 bis 12 Wochen
Tiltaing Gold-Mount Battery Baseplate V2 - Tilta Grey
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
Tiltaing V-Mount Battery Baseplate V2- Tilta Grey
Lieferzeiten von 4 bis 6 WochenLieferzeit 6 Wochen
SHOOTO RIG - Universal Baseplate
The SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends.
Canon C500 Mark II top plate
The SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side.
Sony FX9 push-button view finder mount
The SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side.
15mm Rod Indexable Left Side Wooden Handle
Sony FX9 15mm Lightweight Baseplate which attaches underneath the camera with 3/8?-16 and 1/4?-20 screws.
Blackmagic Pocket Cinema 4K Cage
15mm Rod Indexable Right Side Wooden Handle
60 tooth rosette for using Sachtler Pan bar with OConnor head
Rosette Handle Pair (Rubber)
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Sony FX6)
Lieferzeit binnen 8 bis 12 Wochen
Mini Vertical Camera Bracket
Lieferzeit binnen 8 bis 12 Wochen
Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 8")
Lieferzeit binnen 8 bis 12 Wochen
Rosette Handle Pair (Brown Leather)
Lieferzeit binnen 8 bis 12 Wochen
Wooden Camera Handgrip (Left) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Lieferzeit binnen 8 bis 12 Wochen
Universal ARRI Rosette Rod Bracket (15mm LW/Studio, 19mm)
Lieferzeit binnen 8 bis 12 Wochen
Wooden Camera Handgrip Trigger Box attaches to the Wooden Handgrip (Right) and (Left) to add start/stop functionality for LANC and ARRI 3 pin Fischer compatible cameras.
Lieferzeit binnen 8 bis 12 Wochen
Wooden Camera Handgrip (Right) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Lieferzeit binnen 8 bis 12 Wochen
Top Plate (Canon C300mkII)
Lieferzeit binnen 8 bis 12 Wochen
UVF Mount (Rod/NATO Rail)
Lieferzeit binnen 8 bis 12 Wochen
The 15mm Dual Mount Bolt-On Accessory Rod Kit with 3/8"-16 threads from Wooden Camera includes 1.5, 3, and 5" 15mm bolt-on rods. Each rod sports two 3/8"-16 anti-twist mounts for positioning either on the face or side of your rig.
Lieferzeit binnen 8 bis 12 Wochen